< Back ×
My Vehicle Change Vehicle
2008 Cadillac CTS
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac CTS Cover, Camshaft
PartNumber: 12647772
Product Specifications- Notes: 3.6 Liter, W/Direct Injection; CTS; Left; 3.6L H/O
- Location: Driver Side
- Other Names: Valve Cover
- Item Dimensions: 6.9 x 22.0 x 11.7 inches
- Item Weight: 4.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12631674, 12624804, 12649141, 12593667, 12640147
- Part Description: Cover, Camshaft
$155.21 MSRP:$231.56You Save: $76.35 (33%)
Dorman® OE Solutions Passenger Side Valve Cover for 2008 Cadillac CTS
PartNumber: 264-930Product Specifications- Contains Oil Baffles: No
- Cylinder Head Type: DOHC
- Finish: Black
- Grommets Included: Yes
- Height: 2.5"
- Hold Down Tabs Included: No
- Inside Clearance Height: 1"
- Length: 19.5"
- Material: Plastic
- Material Thickness: 2.7 mm
- Mounting Hardware Included: Yes
- OE Part Number: 12641260, 12604077, 12601741, 12662054, 12609573, 12599429, 12583385, 12609574, 12591201, 12595287
- Oil Filler Cap Included: No
- UPC: 019495889502
- Valve Cover Type: Short
- Width: 8"
- Part Description: OE Solutions Passenger Side Valve Cover
$89.90
OEM (Genuine) 2008 Cadillac CTS Cover, Camshaft
PartNumber: 12641260
Product Specifications- Notes: 3.6 Liter, W/Direct Injection;3.6 Liter, W/O Direct Injection; CTS; Right
- Location: Passenger Side
- Other Names: Valve Cover
- Item Dimensions: 6.9 x 22.2 x 11.9 inches
- Item Weight: 4.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12599429, 12626054, 12591201, 12601741, 12583385, 12609573
- Part Description: Cover, Camshaft
$156.14 MSRP:$232.94You Save: $76.80 (33%)
Dorman® OE Solutions Driver Side Valve Cover for 2008 Cadillac CTS
PartNumber: 264-970Product Specifications- Color: Black
- Contains Oil Baffles: Yes
- Cylinder Head Type: SOHC
- Grommets Included: No
- Height: 3.66"
- Hold Down Tabs Included: Yes
- Inside Clearance Height: 3.2"
- Length: 20.4"
- Material: Plastic
- Material Thickness: 0.4"
- Mounting Hardware Included: Yes
- Oil Filler Cap Included: No
- UPC: 019495299349
- Valve Cover Type: Short
- Width: 10"
- Part Description: OE Solutions Driver Side Valve Cover
$87.71
OEM (Genuine) 2008 Cadillac CTS Valve Cover
PartNumber: 12647768
Product Specifications- Notes: 3.6 Liter, W/O Direct Injection; CTS; Left; 3.6L
- Location: Driver Side
- Other Names: Valve Cover
- Item Dimensions: 7.0 x 21.8 x 11.7 inches
- Item Weight: 4.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12601740, 12591345, 12604078, 12609572, 12595288, 12565940, 12626055
- Part Description: Valve Cover
$142.57 MSRP:$226.37You Save: $83.80 (38%)
Dorman® OE Solutions Driver Side Valve Cover for 2008 Cadillac CTS
PartNumber: 264-925Product Specifications- Color: Black
- Contains Oil Baffles: Yes
- Cylinder Head Type: SOHC
- Grommets Included: Yes
- Height: 4"
- Hold Down Tabs Included: Yes
- Inside Clearance Height: 1.25"
- Item Grade: Standard Replacement
- Length: 17.8"
- Material: Plastic
- Material Thickness: 0.098"
- Mounting Hardware Included: No
- Oil Filler Cap Included: No
- UPC: 019495889458
- Valve Cover Type: Short
- Width: 8.2"
- Part Description: OE Solutions Driver Side Valve Cover
$86.32
OEM (Genuine) 2008 Cadillac CTS Valve Cover Insulator
PartNumber: 12601745
Product Specifications- Notes: 3.6 Liter
- Location: Passenger Side
- Item Dimensions: 18.4 x 9.2 x 2.0 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: Valve Cover Insulator
$41.41 MSRP:$65.74You Save: $24.33 (38%)
FAQ for Valve Cover Repair
Q: How to remove the Camshaft Cover-Right Side?
A:
First, you need to remove the engine cover, remove the upper intake manifold with the lower intake manifold and disconnect the ignition coil electrical connectors. Then, please remove the wiring harness from the side of the camshaft cover by sliding the conduit down and outboard, remove the wiring conduit retainers from the camshaft cover by rotating the wiring harness conduit retainers counterclockwise, remove the wiring harness from the front of the camshaft cover and reposition and secure the wiring harnesses away from the camshaft cover to provide clearance. Finally, you should remove the ignition coils, remove the camshaft cover, and remove and discard the camshaft cover seal and grommets.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the ignition coil bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Camshaft Cover-Left Side (LP1, LY7)?
A:
First, you need to remove the engine cover, remove the upper intake manifold with the lower intake manifold, and disconnect the ignition coil electrical connectors. Then, please remove the wiring harness from the side of the camshaft cover by sliding the conduit down and outboard, remove the wiring conduit retainers from the camshaft cover by rotating the wiring harness conduit retainers counterclockwise, and remove the wiring harness from the front of the camshaft cover. Finally, you should reposition and secure the wiring harnesses away from the camshaft cover to provide clearance, remove the ignition coils, and the camshaft cover, and remove and discard the camshaft cover seal and grommets.
By Bob
GM Specialist
01/11/2022Q: How to install the Camshaft Cover-Left Side (LP1, LY7)?
A:
First, you need to install a NEW camshaft cover seal, the new grommets, the camshaft cover, and the ignition coils. Then, please install the wiring harness to the front of the camshaft cover, install the wiring harness conduit retainers to the wiring harness conduit and install the wiring harness to the side of the camshaft cover. Finally, you should connect the ignition coil electrical connectors, install the upper intake manifold with the lower intake manifold and install the engine cover.
By Bob
GM Specialist
01/11/2022Q: How to install the Camshaft Cover-Right Side?
A:
First, you need to install a NEW camshaft cover seal and NEW grommets. Then, please install the camshaft cover, the ignition coils, install the wiring harness to the front of the camshaft cover, install the wiring harness conduit retainers to the wiring harness conduit and install the wiring harness to the side of the camshaft cover. Finally, you should connect the ignition coil electrical connectors, install the upper intake manifold with the lower intake manifold and install the engine cover.
By Bob
GM Specialist
01/11/2022Q: How to remove the Camshaft Cover-Left Side (LLT)?
A:
First, you need to remove the intake manifold, the fuel pipe shield, and the crankcase ventilation pipe and disconnect the ignition coil electrical connectors. Then, please remove the wiring harness from the side of the camshaft cover by sliding the conduit down and outboard, remove the wiring conduit retainers from the camshaft cover by rotating the wiring harness conduit retainers counterclockwise and disconnect the camshaft position sensors and camshaft actuator valve electrical connectors. Finally, you should reposition and secure the wiring harnesses away from the camshaft cover to provide clearance, remove the ignition coil bolts, the ignition coils, and the camshaft cover, and remove and discard the camshaft cover seal and grommets.
By Bob
GM Specialist
01/11/2022See more FAQs (1)