2008 Cadillac CTS Washer Reservoir

First, you need to remove the front wheelhouse liner and the front brake caliper cooling duct. Then, please disconnect the forward lamp harness electrical connectors from the windshield washer pump, headlamp washer pump, and the windshield washer solvent level indicator. Finally, you should disconnect the windshield washer pump hose and the headlamp washer pump hose at the pump spout and remove the windshield washer container cap.

First, you need to remove the front wheelhouse liner and drain the windshield washer solvent into a suitable clean container. Then, please disconnect the forward lamp harness electrical connectors from the windshield washer container pump and windshield washer solvent level indicator. Finally, you should remove the windshield washer container cap and transfer the parts as needed.

First, you need to lift the washer solvent container from the stud on the front compartment panel assembly and lower the washer container from the wheelhouse compartment. Then, please drain the windshield washer solvent into a suitable clean container and install new grommets before installing the windshield and headlamp washer pumps and the level indicator into the washer solvent container. Finally, you should fill the windshield washer solvent after completion.

The recommended torque is 9 N.m (80 lb in).