2008 Cadillac DTS Automatic Transmission Shifter Cable

You will need to set the park brake and chock the wheels, remove the range selector cable retainer, disconnect the transmission range selector cable terminal from the transmission manual shift lever pin, release the transmission range selector cable from the bracket, remove the console trim plate, remove the transmission range selector cable terminal from the shift control pin, remove the transmission range selector cable from the shift control base, finally unplug the shift cable grommet at the cowl panel and remove the shift cable.

You will need to set the parking brake and chock the wheels, fully lift the retainer from the transaxle range selector cable mechanism, disconnect the transaxle range selector cable terminal from the transaxle manual shift lever pin, press the locking tabs inward to release the transaxle range selector cable from the bracket, remove the left closeout/insulator panel, disconnect the transaxle range selector cable terminal from the shift lever pin, remove the retainer from the transaxle range selector cable mechanism, then release the transaxle range selector cable from the bracket and remove the shift cable.

You may need to install the shift cable through the cowl panel and seat the grommet, slide the transaxle range selector cable fully into the bracket until it snaps into place, connect the transaxle range selector cable terminal to the shift lever pin, then install the retainer to the transaxle range selector cable mechanism, install the left closeout/insulator panel and the transaxle range selector cable, then connect the transaxle range selector cable terminal to the transaxle manual shift lever pin, install the retainer to the transaxle range selector cable mechanism and adjust the automatic transmission range selector cable.