< Back ×
My Vehicle Change Vehicle
2008 Cadillac DTS
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2008 Cadillac DTS Camshaft
PartNumber: 12565170
Product Specifications- Notes: Dts; Intake; Left; Vin Engine Code 9
- Other Names: Camshaft
- Item Dimensions: 27.8 x 3.4 x 3.4 inches
- Item Weight: 5.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Camshaft
Vehicle Fitment- 2008 Cadillac DTS | Base, Platinum | 8 Cyl 4.6 L GAS
$213.31 MSRP:$338.67You Save: $125.36 (38%)OEM (Genuine) 2008 Cadillac DTS Camshaft
PartNumber: 12565165Product Specifications- Notes: Dts; Exhaust; Right; Vin Engine Code Y
- Other Names: Camshaft
- Item Dimensions: 28.1 x 3.3 x 3.4 inches
- Item Weight: 5.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Camshaft
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Camshaft
PartNumber: 12565167Product Specifications- Notes: Dts; Intake; Right; Vin Engine Code Y
- Other Names: Camshaft, Intake Camshaft
- Item Dimensions: 27.8 x 3.3 x 3.4 inches
- Item Weight: 5.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Camshaft
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Camshaft
PartNumber: 12565166Product Specifications- Notes: Dts; Intake; Left; Vin Engine Code Y
- Other Names: Camshaft
- Item Dimensions: 28.4 x 3.4 x 3.4 inches
- Item Weight: 5.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Camshaft
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Camshaft
PartNumber: 12568827Product Specifications- Notes: Dts; Exhaust; Left; Vin Engine Code 9
- Other Names: Camshaft
- Item Dimensions: 28.7 x 3.4 x 3.4 inches
- Item Weight: 5.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Camshaft
Vehicle Fitment- 2008 Cadillac DTS | Base, Platinum | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Camshaft
PartNumber: 12568828Product Specifications- Notes: Dts; Intake; Right; Vin Engine Code 9
- Other Names: Camshaft
- Item Dimensions: 28.4 x 3.4 x 3.4 inches
- Item Weight: 5.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Camshaft
Vehicle Fitment- 2008 Cadillac DTS | Base, Platinum | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Camshaft
PartNumber: 12568826Product Specifications- Notes: Dts; Exhaust; Right; Vin Engine Code 9
- Other Names: Camshaft
- Item Dimensions: 28.4 x 3.5 x 3.3 inches
- Item Weight: 5.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Camshaft
Vehicle Fitment- 2008 Cadillac DTS | Base, Platinum | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac DTS Camshaft
PartNumber: 12565169Product Specifications- Notes: Dts; Exhaust; Left; Vin Engine Code Y
- Other Names: Camshaft, Exhaust Camshaft
- Item Dimensions: 28.1 x 3.3 x 3.4 inches
- Item Weight: 5.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Camshaft
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Premium | 8 Cyl 4.6 L GAS
FAQ for Camshaft Repair
Q: How to install the Camshaft Intermediate Drive Shaft?
A:
You may need to position the camshaft intermediate drive shaft to the engine, align the bolt holes, install the camshaft intermediate drive shaft retaining bolts and tighten the bolts to 15 N.m (11 lb-ft), finally install the camshaft intermediate drive shaft sprocket.
By Bob
GM Specialist
29/10/2022Q: What should you be careful about the camshaft followers?
A:
The follower must be positioned squarely on the valve tip so that the full width of the roller will completely contact the camshaft lobe. If the followers are being reused you must put them back in their original location.
By Bob
GM Specialist
29/10/2022Q: What tools are needed to replace the Camshaft-Left Side?
A:
You will need EN 46327 Timing Chain Retention Tool, J 45059 Angle Meter, and J 44212 Camshaft Holding Tool.
By Bob
GM Specialist
29/10/2022Q: What tools are needed to replace the Camshaft-Right Side?
A:
You will need EN 46327 Timing Chain Retention Tool, J 45059 Angle Meter, and J 44212 Camshaft Holding Tool.
By Bob
GM Specialist
29/10/2022Q: What's the recommended torque for the camshaft sprocket bolts?
A:
The recommended torque is 120 N.m (89 lb-ft).
By Bob
GM Specialist
29/10/2022Q: How to install the camshaft bearing cap bolts?
A:
You may need to alternately hand tighten the camshaft bearing cap bolts a few turns at a time until all caps are fully seated, tighten the camshaft bearing cap bolts to 5 N.m (44 lb in), then tighten the camshaft bearing cap bolts an additional 30 degrees using the J 45059.
By Bob
GM Specialist
29/10/2022Q: How to remove the Camshaft Intermediate Drive Shaft?
A:
You will need to remove the camshaft intermediate drive shaft sprocket, remove the camshaft intermediate drive shaft retaining bolts, remove the camshaft intermediate drive shaft from the engine, then clean and inspect the camshaft intermediate driveshaft.
By Bob
GM Specialist
29/10/2022See more FAQs (2)