< Back ×
My Vehicle Change Vehicle
2008 Cadillac DTS
< Back to View All
Suspension System Components
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac DTS Bushings
PartNumber: 15852293
Product Specifications- Notes: Dts; W/Heavy Duty
- Other Names: Bushing, Stabilizer Bar Bushing
- Item Dimensions: 2.8 x 2.5 x 1.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25895203, 10356434
- Part Description: 2008 Cadillac DTS Bushings
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
$4.43 MSRP:$8.01You Save: $3.58 (45%)
OEM (Genuine) 2008 Cadillac DTS Bushings
PartNumber: 10356430
Product Specifications- Notes: Dts; W/O Heavy Duty
- Location: Driver Side; Passenger Side
- Other Names: Bushing, Stabilizer Bar Bushing
- Item Dimensions: 3.4 x 3.0 x 1.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac DTS Bushings
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
Delphi® Front Sway Bar Bushings for 2008 Cadillac DTS
PartNumber: TD4787WProduct Specifications- Notes: FE1 or FE3 Susp
- Item Grade: Standard Replacement
- UPC: 689604333174
- Part Description: 2008 Cadillac DTS Front Sway Bar Bushings
Vehicle Fitment- 2008 Cadillac DTS | All Trims | All Engines
OEM (Genuine) 2008 Cadillac DTS Insulator-Rear Stabilizer Shaft
PartNumber: 20757299
Product Specifications- Notes: Dts
- Location: Passenger Side; Driver Side
- Item Dimensions: 3.4 x 3.1 x 3.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25604385
- Part Description: 2008 Cadillac DTS Insulator-Rear Stabilizer Shaft
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Sway Bar Bushing Repair
Q: How to remove the Stabilizer Shaft Insulator (FE1, FE3)?
A:
You will need to remove the stabilizer shaft insulator bracket retaining bolts, remove the stabilizer shaft insulator bracket, then pry upwards and remove the stabilizer shaft insulator from the stabilizer shaft using a pry bar.
By Bob
GM Specialist
02/11/2022Q: How to install the Stabilizer Shaft Insulator (FE7)?
A:
You may need to pry upwards and install the stabilizer shaft insulator to the stabilizer shaft, install the stabilizer shaft insulator bracket to the stabilizer shaft insulator, install the stabilizer shaft bracket retaining bolts and tighten them to 67 N.m (49 lb-ft), and finally lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: How to remove the Stabilizer Shaft Insulator (FE1 and FE3)?
A:
You will need to remove the stabilizer shaft bracket bolt, bend open the end of the stabilizer shaft bracket upward and remove the stabilizer shaft bracket, then move the stabilizer shaft rearward and remove the stabilizer shaft insulator using a pry bar.
By Bob
GM Specialist
02/11/2022Q: How to install the Stabilizer Shaft Insulator (FE1 and FE3)?
A:
You may need to move the stabilizer shaft rearward and Install the stabilizer shaft insulator, install the stabilizer shaft insulator in the stabilizer shaft bracket with the slit facing forward, bend the stabilizer shaft bracket downward to close around the stabilizer shaft insulator, install the stabilizer shaft bracket bolts and tighten the stabilizer shaft bracket bolts to 33 N.m (24 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to remove the Stabilizer Shaft Insulator (FE7)?
A:
You will need to raise and support the vehicle, remove the stabilizer shaft insulator bracket retaining bolts and the stabilizer shaft insulator bracket, next pry upwards, and remove the stabilizer shaft insulator from the stabilizer shaft.
By Bob
GM Specialist
02/11/2022Q: How to install the Stabilizer Shaft Insulator (FE1, FE3)?
A:
You may need to pry upwards and install the stabilizer shaft insulator to the stabilizer shaft and install the stabilizer shaft insulator bracket to the stabilizer shaft insulator, then install the stabilizer shaft bracket retaining bolts, and then tighten the stabilizer shaft bracket retaining bolts to 33 N.m (24 lb-ft).
By Bob
GM Specialist
02/11/2022See more FAQs (1)