< Back ×
2008 Cadillac Escalade ESV Cooling Fan Shroud
My Vehicle Change Vehicle
2008 Cadillac Escalade ESV
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2008 Cadillac Escalade ESV Fan Shroud
PartNumber: 15780789$281.75 MSRP:$424.99You Save: $143.24 (34%)Product Specifications- Notes: W/Electric Cooling Fan, W/Heavy Duty
- Other Names: Fan Shroud, Shroud
- Item Dimensions: 9.5 x 41.6 x 23.5 inches
- Item Weight: 12.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac Escalade ESV Fan Shroud
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
OEM (Genuine) 2008 Cadillac Escalade ESV Fan Shroud
PartNumber: 15780788$222.84 MSRP:$350.41You Save: $127.57 (37%)Product Specifications- Notes: W/Electric Cooling Fan, W/O Heavy Duty
- Other Names: Fan Shroud, Shroud
- Item Dimensions: 9.2 x 40.8 x 23.3 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac Escalade ESV Fan Shroud
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Product Specifications- Notes: W/O Electric Cooling Fan
- Other Names: Fan Shroud, Lower Shroud, Shroud
- Item Dimensions: 38.8 x 12.1 x 10.8 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15067753, 15164394, 15765440, 15707563
- Part Description: 2008 Cadillac Escalade ESV Lower Shroud
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Product Specifications- Notes: W/O Electric Cooling Fan
- Other Names: Fan Shroud, Upper Shroud
- Item Dimensions: 38.4 x 12.8 x 9.9 inches
- Item Weight: 2.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac Escalade ESV Shroud-Engine Coolant Fan Upper
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
FAQ for Cooling Fan Shroud Repair
Q: What should I notice in Cooling Fan and Shroud Installation Procedure?
A:
Insert the 3 lower tabs into the radiator support flange. Keeping the shroud parallel to the radiator will ensure the correct installation of the lower tabs.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the transmission cooling line bolts?
A:
The recommended torque is 4 N.m (35 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Coolant Fan Upper Shroud?
A:
You can install the air cleaner outlet duct, the throttle body heater hose retainer, the inlet radiator hose retainer, the fan shroud retainers, the fan shroud bolts, and the upper fan shroud, tighten the air cleaner outlet duct clamp at the throttle body, the air cleaner outlet duct clamp at the mass airflow sensor.
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Coolant Fan Lower Shroud?
A:
You can install the lower fan shroud and ensure it is centered over the lower radiator support, the oil cooler hose clip to the lower fan shroud, and the cooling fan.
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Coolant Fan Upper Shroud?
A:
You can loosen the air cleaner outlet duct clamps from the throttle body, the air cleaner outlet duct clamps from the mass airflow sensor, remove the air cleaner outlet duct, the throttle body heater hose retainer, the inlet radiator hose retainer, the fan shroud retainers, the fan shroud bolts, the upper fan shroud.
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Coolant Fan Lower Shroud?
A:
You can remove the cooling fan, and the oil cooler hose clip from the lower fan shroud, and lift the lower fan shroud up to disengage the fan shroud from the retaining clips on the radiator.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the cooling fan shroud bolts?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (2)