< Back ×
My Vehicle Change Vehicle
2008 Cadillac Escalade ESV
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac Escalade ESV Valve Cover
PartNumber: 12570427
Product Specifications- Notes: Escalade Esv; Left
- Location: Driver Side
- Other Names: Valve Cover
- Item Dimensions: 5.2 x 5.0 x 24.5 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12561820
- Part Description: 2008 Cadillac Escalade ESV Valve Cover
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
$120.48 MSRP:$191.30You Save: $70.82 (38%)
Dorman® OE Solutions Driver Side Valve Cover Kit for 2008 Cadillac Escalade ESV
PartNumber: 264-965Product Specifications- Color: Natural
- Height: 3"
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Length: 19.5"
- Material: Aluminum
- OE Part Number: 12570427, 8-12570-427-0, 8-12561-820-0
- Oil Filler Cap Included: No
- UPC: 019495299905
- Valve Cover Type: Standard
- Width: 5"
- Part Description: 2008 Cadillac Escalade ESV OE Solutions Driver Side Valve Cover Kit
Vehicle Fitment- 2008 Cadillac Escalade ESV | All Trims | 8 Cyl 6.2L
$91.72OEM (Genuine) 2008 Cadillac Escalade ESV Valve Cover
PartNumber: 12582224
Product Specifications- Notes: Escalade Esv; Right
- Location: Passenger Side
- Other Names: Valve Cover
- Item Dimensions: 4.9 x 4.9 x 24.9 inches
- Item Weight: 2.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12570428, 12561819, 12561818, 12559896
- Part Description: 2008 Cadillac Escalade ESV Valve Cover
Vehicle Fitment- 2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
$98.64 MSRP:$156.66You Save: $58.02 (38%)
FAQ for Valve Cover Repair
Q: What is the recommended torque for the ignition coil bracket studs?
A:
The recommended torque is 12 N.m (106 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the heater hose bracket and nut?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Valve Rocker Arm Cover?
A:
You can remove the intake manifold cover, the connector position assurance (CPA) retainer, disconnect the engine harness electrical connector, remove the engine harness clip, reposition the engine harness, remove the spark plug wires, the ignition coil bracket studs, the ignition coil bracket, the positive crankcase ventilation (PCV) hose, loosen the valve rocker arm cover bolts, remove the valve rocker arm cover, remove and discard the old gasket.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rocker arm cover bolts?
A:
The recommended torque is 12 N.m (106 lb in).
By Bob
GM Specialist
01/11/2022Q: What should I notice in Valve Rocker Arm Cover installation procedure?
A:
All gasket surfaces should be free of oil or other foreign material during assembly. If the oil fill tube has been removed from the rocker arm cover, install a NEW fill tube during assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the Valve Rocker Arm Cover?
A:
You can install a rocker cover gasket, and the valve rocker arm cover, tighten the rocker arm cover bolts, install the PCV hose, and apply thread lock to the threads of the ignition coil bracket studs. Refer to Sealers, Adhesives, and Lubricants, position the ignition coil bracket, install the ignition coil bracket studs, and the spark plug wires, position the engine harness, install the engine harness clip, connect the engine harness electrical connector, install the CPA retainer, the intake manifold cover.
By Bob
GM Specialist
01/11/2022See more FAQs (1)