< Back ×
2008 Cadillac SRX Battery Cables
My Vehicle Change Vehicle
2008 Cadillac SRX
< Back to View All
Alternators, Batteries & Starters
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac SRX Positive Cable
PartNumber: 25789370$78.70 MSRP:$143.10You Save: $64.40 (46%)Product Specifications- Notes: Srx; 4.6l
- Other Names: Positive Cable
- Item Dimensions: 3.1 x 21.2 x 20.4 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Positive Cable
Vehicle Fitment- 2008 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac SRX Positive Cable
PartNumber: 15804441$86.24 MSRP:$162.74You Save: $76.50 (48%)Product Specifications- Notes: 4.6 Liter
- Other Names: Positive Cable
- Item Dimensions: 3.1 x 14.6 x 13.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Positive Cable
Vehicle Fitment- 2008 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
Product Specifications- Notes: 3.6 Liter
- Other Names: Negative Cable
- Item Dimensions: 4.1 x 4.2 x 33.3 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Negative Cable
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
- Product Specifications
- Notes: 3.6 Liter
- Other Names: Positive Cable
- Item Dimensions: 21.4 x 20.4 x 2.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25796741
- Part Description: 2008 Cadillac SRX Positive Cable
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
Product Specifications- Color: BLACK
- Gauge: 4
- Length: 7.5 IN
- Nominal OD: 0.354
- Terminal Type: TOP (UNIV)
- UPC: 083996088658
- Part Description: 2008 Cadillac SRX Positive Battery Cable
Vehicle Fitment- 2008 Cadillac SRX | All Trims | 6 Cyl 3.6L
- 2008 Cadillac SRX | All Trims | 8 Cyl 4.6L
Product Specifications- Notes: Srx; 3.6l
- Other Names: Positive Cable
- Item Dimensions: 4.0 x 17.9 x 16.8 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25788946, 25799865
- Part Description: 2008 Cadillac SRX Positive Cable
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
- Product Specifications
- Notes: 4.6 Liter
- Other Names: Negative Cable
- Item Dimensions: 3.1 x 15.8 x 14.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25788945
- Part Description: 2008 Cadillac SRX Cable Asm-Battery Negative
Vehicle Fitment- 2008 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
- Product Specifications
- Notes: Srx; 3.6l
- Other Names: Negative Cable
- Item Dimensions: 4.1 x 11.6 x 11.4 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25788944
- Part Description: 2008 Cadillac SRX Cable Asm-Battery Negative
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
FAQ for Battery Cables Repair
Q: How to remove the Battery Positive Cable (LY7 (RHD))?
A:
You should disconnect the negative battery cable, loosen the positive battery cable bolt, remove the positive battery cable, open the bussed electrical center (BEC) terminal cover, remove the positive battery cable nut and the positive battery cable, raise and support the vehicle, reposition the positive battery cable boot at the generator output battery terminal, remove the generator output battery terminal nut and the battery positive cable from the generator, the starter terminal nut, the battery positive cable and the transmission lower bellhousing bolt, reposition the positive battery cable clip from the bellhousing, lower the vehicle, cut the tie straps securing the positive battery cable to the engine wiring harness and remove the positive battery cable clips and the positive battery cable from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Battery Negative Cable (LY7 (RHD))?
A:
You should remove the fuel injector sight shield, disconnect the negative battery cable, the instrument panel (I/P) wiring harness electrical connector from the negative battery cable electrical connector, and the I/P wiring harness electrical connector from the battery current sensor and remove the negative battery cable ground bolt, the negative cable ground bolt at the cylinder head and the negative battery cable from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Battery Positive Cable (LY7 (LHD))?
A:
You should disconnect the negative battery cable, loosen the positive battery cable bolt, remove the positive battery cable from the battery, open the bussed electrical center (BEC) terminal cover, remove the positive battery cable nut and the positive battery cable from the BEC stud, raise and support the vehicle, reposition the positive battery cable boot at the generator output battery terminal, remove the generator output battery terminal nut, the battery positive cable and the transmission lower bellhousing bolt, reposition the positive battery cable clip from the bellhousing, remove the starter terminal nut and the battery positive cable, lower the vehicle and remove the positive battery cable clips and the positive battery cable from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the negative battery cable ground bolt?
A:
The recommended torque is 45 Nm (33 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Battery Negative Cable (LY7 (LHD))?
A:
You should disconnect the negative battery cable, the instrument panel (I/P) wiring harness electrical connector from the negative battery cable electrical connector, and the I/P wiring harness electrical connector from the battery current sensor and remove the negative battery cable ground bolt, the negative battery cable clip from the strut tower stud, the negative cable ground stud at the cylinder head and the negative battery cable from the vehicle.
By Bob
GM Specialist
01/11/2022