2008 Cadillac SRX Fuse Box

You should turn the ignition off, disconnect the battery negative cable and remove the Starter solenoid electrical connector from the starter, the starter terminal nut, the battery positive cable from the starter, the starter motor bolts, and the starter motor.

You should remove the right rear body side trim, disconnect the electrical connectors from the rear Body Control Module and remove the module from the mounting bracket.

You should disable the SIR system, remove the seat cushion from the adjuster track enough to gain access to the Power Seat Switch and the knobs from the switch by gently prying them off using a flat-bladed tool, locate the retainers securing the power seat switch bezel to the seat cushion frame, squeeze the retainers while gently prying the bezel from the seat cushion frame, remove the power seat switch bezel, release the J channel retainers securing the seat cushion cover to the seat cushion frame to gain access to the power seat switch, remove the push-in fastener securing the power seat switch to the seat cushion frame, slide the power seat switch from the seat cushion frame and disconnect the electrical connector from the power seat switch.