< Back ×
2008 Cadillac SRX HVAC Heater Blend Door Actuator
My Vehicle Change Vehicle
2008 Cadillac SRX
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2008 Cadillac SRX Temperature Motor
PartNumber: 89024960$58.32 MSRP:$110.06You Save: $51.74 (48%)Product Specifications- Notes: Front
- Location: Driver Side; Passenger Side
- Other Names: Temperature Motor
- Item Dimensions: 7.7 x 6.4 x 4.8 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Temperature Motor
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
Product Specifications- Notes: Mode; Packaging Type: Box
- Material: Plastic
- OE Part Number: 19130240
- Package Contents: Actuator
- Switch Activation Type: Rotary
- UPC: 019495431657
- Part Description: 2008 Cadillac SRX Hvac Air Door Actuator
Vehicle Fitment- 2008 Cadillac SRX | All Trims | All Engines
Product Specifications- Door Linkage: Cam
- Mounting Ear Qty.: 4
- Style: Floor Mode Actuator
- Terminal Pin Qty.: 5
- UPC: 096361076426
- Wire Quantity: Not Applicable
- Part Description: 2008 Cadillac SRX HVAC Air Door Actuator
Vehicle Fitment- 2008 Cadillac SRX | All Trims | All Engines
Product Specifications- Notes: Air Inlet; Packaging Type: Box
- Material: Plastic
- OE Part Number: 25740409, 88892764
- Package Contents: Actuator
- Switch Activation Type: Rotary
- UPC: 019495431527
- Part Description: 2008 Cadillac SRX Hvac Air Door Actuator
Vehicle Fitment- 2008 Cadillac SRX | All Trims | All Engines
Product Specifications- Door Linkage: Arm
- Mounting Ear Qty.: 4
- Style: Recirculation Door Actuator
- Terminal Pin Qty.: 5
- UPC: 096361073470
- Wire Quantity: Not Applicable
- Part Description: 2008 Cadillac SRX Hvac Air Inlet Door Actuator
Vehicle Fitment- 2008 Cadillac SRX | All Trims | 6 Cyl 3.6L
Product Specifications- Notes: Temperature; Packaging Type: Box
- Material: Plastic
- OE Part Number: 89024960
- Package Contents: Actuator
- Switch Activation Type: Rotary
- UPC: 019495431589
- Part Description: 2008 Cadillac SRX Hvac Air Door Actuator
Vehicle Fitment- 2008 Cadillac SRX | All Trims | All Engines
Product Specifications- Door Linkage: Arm
- Mounting Ear Qty.: 4
- Style: Temperature Blend Actuator
- Terminal Pin Qty.: 5
- UPC: 096361073395
- Wire Quantity: Not Applicable
- Part Description: 2008 Cadillac SRX Hvac Heater Blend Door Actuator
Vehicle Fitment- 2008 Cadillac SRX | All Trims | All Engines
Product Specifications- Notes: Grade: Aftermarket; Temperature Actuator
- Height [mm]: 45
- Length [mm]: 88
- Operating Mode: Electric
- Packaging Depth [cm]: 8,5
- Packaging height [cm]: 11,6
- Packaging width [cm]: 13
- Weight [kg]: 0.123
- Width [mm]: 81
- Part Description: 2008 Cadillac SRX HVAC Heater Blend Door Actuator
Vehicle Fitment- 2008 Cadillac SRX | All Trims | 6 Cyl 3.6L
- 2008 Cadillac SRX | All Trims | 8 Cyl 4.6L
Product Specifications- Notes: Front
- Other Names: Actuator, Mode Motor
- Item Dimensions: 7.8 x 6.2 x 4.8 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Actuator, Mode Valve
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
Product Specifications- Other Names: Actuator
- Item Dimensions: 7.6 x 6.1 x 4.9 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Actuator Asm, Air Inlet Valve
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Hvac Heater Blend Door Actuator Repair
Q: How to remove the Recirculation Actuator (Left Hand Drive)?
A:
You should remove the air inlet assembly, disconnect the electrical connector from the recirculation actuator and remove the recirculation actuator screws and the recirculation actuator.
By Bob
GM Specialist
01/11/2022Q: How to remove the Recirculation Actuator (Right Hand Drive)?
A:
You should remove the air inlet assembly, disconnect the electrical connector from the recirculation actuator and remove the recirculation actuator screws and the recirculation actuator.
By Bob
GM Specialist
01/11/2022Q: How to install the Air Temperature Actuator-Left Side?
A:
You should install the left air temperature actuator and the left air temperature actuator harness screw, connect the left air temperature actuator electrical connector to the actuator and install the left air temperature actuator screws and the instrument panel (I/P) carrier.
By Bob
GM Specialist
01/11/2022Q: How to install the Recirculation Actuator (Right Hand Drive)?
A:
You should install the recirculation actuator and the recirculation actuator screws, connect the electrical connector to the recirculation actuator and install the air inlet assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the recirculation actuator screws
A:
The recommended torque is 1 Nm (9 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the recirculation actuator screws?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Recirculation Actuator (Left Hand Drive)?
A:
You should install the recirculation actuator and the recirculation actuator screws, connect the electrical connector to the recirculation actuator and install the air inlet assembly.
By Bob
GM Specialist
01/11/2022Q: How to remove the Air Temperature Actuator-Left Side?
A:
You should remove the instrument panel (I/P) carrier, the left air temperature actuator screws, and the left air temperature actuator harness screw, disconnect the left air temperature actuator electrical connector from the actuator and remove the left air temperature actuator.
By Bob
GM Specialist
01/11/2022Q: How to install the Mode Actuator?
A:
If replacing the mode actuator, you should transfer the lever from the old actuator to the new actuator, install the mode actuator and the mode actuator screws, tighten the screws, connect the electrical connector to the actuator and install the I/P carrier.
By Bob
GM Specialist
01/11/2022Q: How to remove the Mode Actuator?
A:
You should remove the instrument panel (I/P) carrier, disconnect the mode actuator electrical connector and remove the mode actuator screws and the mode actuator.
By Bob
GM Specialist
01/11/2022See more FAQs (7)