< Back ×
My Vehicle Change Vehicle
2008 Cadillac SRX
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2008 Cadillac SRX Adjust Switch
PartNumber: 10315826
Product Specifications- Notes: Driver Seat, Black; Passenger Seat, Black
- Other Names: Adjust Switch, Lumbar Switch, Switch
- Item Dimensions: 2.8 x 1.9 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25928038
- Part Description: 2008 Cadillac SRX Adjust Switch
Vehicle Fitment- 2008 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$29.17 MSRP:$44.01You Save: $14.84 (34%)
OEM (Genuine) 2008 Cadillac SRX Seat Switch
PartNumber: 12450263
Product Specifications- Notes: Driver Seat; SRX; Left
- Other Names: Seat Switch, Switch
- Item Dimensions: 5.9 x 3.4 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Seat Switch
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$76.81 MSRP:$115.86You Save: $39.05 (34%)
OEM (Genuine) 2008 Cadillac SRX Lumbar Switch
PartNumber: 15210786
Product Specifications- Notes: Driver Seat, Cashmere; Passenger Seat, Cashmere
- Other Names: Lumbar Switch, Switch
- Item Dimensions: 2.2 x 1.3 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Lumbar Switch
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$5.36 MSRP:$8.07You Save: $2.71 (34%)OEM (Genuine) 2008 Cadillac SRX Switch, Passenger Seat Reclining
PartNumber: 12450264
Product Specifications- Notes: Passenger Seat; SRX; Right
- Other Names: Adjuster Switch, Seat Switch, Switch
- Item Dimensions: 6.2 x 3.3 x 3.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Switch, Passenger Seat Reclining
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac SRX Switch Asm-Driver Seat & Passenger Seat Lumbar Conical*Gray L
PartNumber: 25772913Product Specifications- Notes: Driver Seat, Gray; Passenger Seat, Gray
- Other Names: Lumbar Switch
- Item Dimensions: 2.7 x 1.9 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Switch Asm-Driver Seat & Passenger Seat Lumbar Conical*Gray L
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac SRX Switch Asm-Driver Seat Heater
PartNumber: 25881821
Product Specifications- Notes: 2007-09
- Location: Driver Side
- Other Names: Seat Heat Switch, Switch
- Item Dimensions: 20.7 x 2.7 x 1.5 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15776581
- Part Description: 2008 Cadillac SRX Switch Asm-Driver Seat Heater
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac SRX Switch Asm-Passenger Seat Heater
PartNumber: 25881822Product Specifications- Notes: 2007-09
- Location: Passenger Side
- Other Names: Seat Heat Switch, Switch
- Item Dimensions: 17.6 x 2.8 x 1.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15776582
- Part Description: 2008 Cadillac SRX Switch Asm-Passenger Seat Heater
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Power Seat Switch Repair
Q: How to remove the Rear Seat Control Module-Rear Seat Number 2?
A:
You should remove the seat cushion frame, disconnect the electrical connector from the seat control module and remove the nuts from the control module and the module.
By Bob
GM Specialist
02/11/2022Q: How to install the Rear Seat Control Module-Rear Seat Number 2?
A:
You should install the seat control module on to seat adjuster and the seat control module nuts, connect the electrical connector to the control module, install the seat cushion frame and calibrate the seat.
By Bob
GM Specialist
02/11/2022Q: How to remove the Rear Seat Number 2 Folding Actuator Switch-Rear Quarter Trim Rear?
A:
You should remove the body side rear trim panel and the folding seat switch from the trim panel.
By Bob
GM Specialist
01/11/2022Q: How to install the Lumbar Switch?
A:
You should install the lumbar switch into the seat track trim cover, connect the electrical connector and install the seat track trim cover to the seat.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Seat Number 2 Folding Actuator Switch-Rear Quarter Trim Rear?
A:
You should install the folding seat switch to the trim panel and the body side rear trim panel and calibrate the seat.
By Bob
GM Specialist
01/11/2022Q: How to service the Memory Seat Calibration?
A:
The memory seat module uses position sensor inputs to establish soft stop locations for the adjuster motors several millimeters ahead of the physical limits of the adjuster assembly. After replacing a memory seat module or adjuster components, it may be necessary to reset the adjuster motor soft stop locations. When the repair procedure has been completed, you should operate the seat adjuster switch in every direction until the seat adjuster reaches its mechanical hard stop by repeatedly pressing and releasing the switch as necessary.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Seat Number 2 Folding Actuator Switch-Rear Quarter Trim Front?
A:
You should install the folding seat switch to the trim panel and the body side rear trim panel and calibrate the seat.
By Bob
GM Specialist
01/11/2022Q: How to install the Driver Seat Adjuster Memory Switch?
A:
You should snap the switch into the door switch bezel, connect the electrical connector, insert the rear of the switch assembly into the door trim panel and press down on the front of the switch assembly to engage the switch to the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the Lumbar Switch?
A:
You should remove the seat track trim cover from the seat, disconnect the lumbar switch electrical connector and remove the lumbar switch.
By Bob
GM Specialist
01/11/2022Q: How to remove the Driver Seat Adjuster Memory Switch?
A:
You should insert a flat-bladed tool under the front edge of the switch assembly to release the retainer from the door trim panel, disconnect the electrical connector from the switch, use a flat-bladed tool to disengage the locking tabs from both sides of the switch, and remove the switch.
By Bob
GM Specialist
01/11/2022See more FAQs (7)