< Back ×
My Vehicle Change Vehicle
2008 Cadillac SRX
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
Victor Reinz® Valve Stem Oil Seal Set for 2008 Cadillac SRX
PartNumber: 12-10111-01Product Specifications- Complete: Y
- Contains Applications: Y
- Gasket Type: Gasket
- Grade Type: Regular
- Inside Diameter: 0.190
- Material: Metal And Rubber
- Meets or Exceeds OEM Specs: y
- Outside Diameter: 1.084
- Release Wave: 05/31/2018
- Sealing Surface Type: Flanged
- Thickness: 0.779
- UPC: 023913658823
- Part Description: 2008 Cadillac SRX Valve Stem Oil Seal Set
Vehicle Fitment- 2008 Cadillac SRX | All Trims | 6 Cyl 3.6L
$25.30
OEM (Genuine) 2008 Cadillac SRX Valve Seals
PartNumber: 12574354
Product Specifications- Notes: Srx
- Other Names: Valve Seal
- Item Dimensions: 2.4 x 3.4 x 2.9 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24100293, 12553354
- Part Description: 2008 Cadillac SRX Valve Seals
Vehicle Fitment- 2008 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
$6.88 MSRP:$10.91You Save: $4.03 (37%)OEM (Genuine) 2008 Cadillac SRX Valve Seals
PartNumber: 12565836Product Specifications- Notes: Srx
- Other Names: Valve Seal
- Item Dimensions: 1.6 x 1.3 x 0.9 inches
- Item Weight: 0.50 Pounds
- Part Description: 2008 Cadillac SRX Valve Seals
Vehicle Fitment- 2008 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
FAQ for Valve Stem Oil Seal Repair
Q: How to remove the Valve Stem Oil Seal and Valve Spring-Left Side?
A:
You should remove the starter motor, install the EN 46106 to prevent crankshaft rotation, remove the camshafts and rocker arms and the spark plug from the applicable cylinder, install the J 39313 to the applicable cylinder, connect the J 39313 to a compressed air source, install the EN 46110 above the applicable cylinder as shown, tighten the EN 46110 valve spring compressor nut, remove the valve keepers, loosen the EN 46110 valve spring compressor nut and remove the valve spring retainer, the valve spring and the valve stem seal.
By Bob
GM Specialist
01/11/2022Q: How to remove the Valve Stem Oil Seal and Valve Spring-Right Side?
A:
You should remove the starter motor, install the EN 46106 to prevent crankshaft rotation, remove the camshafts and rocker arms and the spark plug from the applicable cylinder, install the J 39313 to the applicable cylinder, connect the J 39313 to a compressed air source, install the EN 46110 above the applicable cylinder as shown, tighten the EN 46110 valve spring compressor nut, remove the valve keepers, loosen the EN 46110 valve spring compressor nut and remove the valve spring retainer, the valve springs and the valve stem seal.
By Bob
GM Specialist
01/11/2022