< Back ×
My Vehicle Change Vehicle
2008 Cadillac STS
< Back to View All
Light Relays, Switches & Control Modules
- Department
- Prices
OEM (Genuine) 2008 Cadillac STS Module
PartNumber: 25857315
Product Specifications- Notes: Body Control
- Other Names: Module
- Item Dimensions: 8.2 x 3.1 x 12.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15816761, 15262719, 15934903
- Part Description: 2008 Cadillac STS Module
Vehicle Fitment- 2008 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac STS Body Control Module Assembly
PartNumber: 9072196
Product Specifications- Notes: STS, STS-V; Instrument Panel; 1St Design;STS, STS-V; Rear; 2ND Design
- Other Names: Body Control Module, Module
- Item Dimensions: 7.1 x 6.2 x 2.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac STS Body Control Module Assembly
Vehicle Fitment- 2008 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac STS Rear Object Alarm Module
PartNumber: 15216801
Product Specifications- Notes: Reverse Sensing System
- Other Names: Control Module, Module
- Item Dimensions: 8.1 x 4.5 x 2.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25743840
- Part Description: 2008 Cadillac STS Rear Object Alarm Module
Vehicle Fitment- 2008 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Body Control Module Repair
Q: What is the removal procedure for the Body Control Module?
A:
The procedure is to remove the instrument panel (I/P) compartment, remove the screws securing the body control module to the module bracket, and disconnect the electrical connectors.
By Bob
GM Specialist
01/11/2022Q: How to remove the Rear Integration Body Control Module?
A:
The procedure is to remove the rear upper compartment trim, release the tabs securing the rear integration module to the module bracket, and disconnect the electrical connectors.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screws?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Integration Body Control Module?
A:
The procedure is to connect the electrical connectors, install the module to the bracket, install the rear upper compartment trim, and reprogram the module.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Body Control Module?
A:
The procedure is to connect the electrical connectors, install the module to the bracket, install the screws that secure the module to the bracket, install the I/P compartment, and reprogram the module.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the nuts securing the module to the vehicle?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the Communication Interface Module?
A:
The procedure is to remove the right rear compartment trim, remove the nuts securing the OnStar(R) module to the vehicle body, disconnect all the electrical connectors from the module, and remove the module from the vehicle.
By Bob
GM Specialist
29/10/2022Q: What is the installation procedure for the Communication Interface Module?
A:
The procedure is to record the 11-digit electronic serial number (ESN) and the 10-digit station identification (STID) number from the label on the new vehicle communication interface module (VCIM), reconnect the electrical connectors to the module and install the module onto the vehicle.
By Bob
GM Specialist
29/10/2022See more FAQs (3)