< Back ×
My Vehicle Change Vehicle
2008 Cadillac XLR
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2008 Cadillac XLR AC Tube
PartNumber: 22759527
Product Specifications- Other Names: AC Tube
- Item Dimensions: 42.1 x 21.6 x 9.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10385363, 10442893
- Part Description: 2008 Cadillac XLR AC Tube
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$123.14 MSRP:$232.36You Save: $109.22 (48%)
OEM (Genuine) 2008 Cadillac XLR AC Line
PartNumber: 22783651
Product Specifications- Notes: 4.6 Liter
- Other Names: AC Line
- Item Dimensions: 32.1 x 9.0 x 8.8 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15251673, 10441359
- Part Description: 2008 Cadillac XLR AC Line
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac XLR Hose Asm-A/C Compressor & Condenser
PartNumber: 10350993
Product Specifications- Notes: XLR; Condenser & Compressor
- Other Names: AC Hose, Pressure Hose
- Item Dimensions: 39.8 x 19.7 x 5.4 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Hose Asm-A/C Compressor & Condenser
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac XLR Tube Asm-A/C Evaporator Thermal Expansion Valve Rear
PartNumber: 25777907
Product Specifications- Notes: 4.4 Liter
- Other Names: AC Line
- Item Dimensions: 29.6 x 13.3 x 11.4 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10346003, 15883327
- Part Description: 2008 Cadillac XLR Tube Asm-A/C Evaporator Thermal Expansion Valve Rear
Vehicle Fitment- 2008 Cadillac XLR | V | 8 Cyl 4.4 L GAS
FAQ for A/C Hose Repair
Q: How to remove the Compressor Hose Assembly?
A:
You should remove the radiator support, the A/C compressor hose assembly bolt from the A/C condenser fitting, the sealing washer, the right front tire and wheel assembly from the vehicle, the A/C compressor hose assembly to A/C compressor retaining nut, the sealing washers, the power steering pump and the A/C compressor hose assembly from the vehicle.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the front evaporator inlet line to the A/C condenser lower bolt?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
28/10/2022Q: How to remove the Air Conditioning Evaporator Front Tube?
A:
You should remove the battery, the front evaporator inlet line to the A/C condenser lower bolt, the sealing washer, the O-rings, and the front evaporator inlet line from the vehicle.
By Bob
GM Specialist
28/10/2022Q: How to install the Air Conditioning Evaporator Front Tube?
A:
You should install the front evaporator inlet line to the vehicle, remove the cap or tape from the evaporator rear line assembly, install new O-rings to the rear evaporator line assembly, remove the cap or tape from the A/C condenser, install a new sealing washer to the front evaporator inlet line, the front evaporator inlet line to A/C condenser lower bolt, and the battery.
By Bob
GM Specialist
28/10/2022Q: How to install the Air Conditioning Line/Tube Connector?
A:
You should install the A/C coupling assembly to the A/C refrigerant component, recharge the A/C system, and leak-test the fittings of the component using J 39400-A.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the A/C compressor hose assembly bolt to the A/C condenser fitting?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
28/10/2022Q: How to remove the Air Conditioning Line/Tube Connector?
A:
You should recover the refrigerant from the A/C system, locate the A/C coupling assembly's locking tab access slots, insert a small flat-bladed screwdriver into the first locking tab access slot and gently lift the locking tab to release the lock, insert a small flat-bladed screwdriver into the second locking tab access slot and gently lift the locking tab to release the lock, and remove the A/C coupling assembly from the A/C refrigerant component.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the heater pipe bracket retaining nut?
A:
The recommended torque is 10 N.m (7 lb-ft).
By Bob
GM Specialist
28/10/2022Q: How to install the Air Conditioning Evaporator Rear Tube?
A:
You should remove the cap or tape from the TXV, install new seal washers to the evaporator rear line assembly, the evaporator rear line assembly to the vehicle, the TXV block fitting nut, and the heater pipe bracket retaining nut to the cowl stud, remove cap or tape from the front evaporator line and A/C compressor line, install new O-rings to the rear evaporator line assembly, the intake manifold and the battery.
By Bob
GM Specialist
28/10/2022Q: How to install the Compressor Hose Assembly?
A:
You should install the A/C compressor hose assembly to the vehicle, and the power steering pump, remove the cap or tape from the A/C compressor, install new sealing washers onto the compressor hose assembly, the A/C compressor hose assembly to the A/C compressor retaining nut, and the right front tire and wheel assembly to the vehicle, remove cap or tape from the evaporator outlet tube, install a new O-rings onto the evaporator outlet tube, and the A/C tube connector to the evaporator outlet tube and A/C compressor hose assembly, remove cap or tape from the A/C condenser fitting, install a new sealing washer onto the compressor hose assembly, the A/C compressor hose assembly bolt to the A/C condenser fitting, and the radiator support.
By Bob
GM Specialist
28/10/2022See more FAQs (6)