< Back ×
My Vehicle Change Vehicle
2008 Cadillac XLR
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2008 Cadillac XLR Serpentine Tensioner
PartNumber: 12598023
Product Specifications- Notes: 4.6 Liter, Drive Belt; 4.4 Liter, Serentine Belt
- Other Names: Serpentine Tensioner, Tensioner
- Item Dimensions: 6.3 x 5.1 x 10.4 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12589201
- Part Description: 2008 Cadillac XLR Serpentine Tensioner
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$56.92 MSRP:$94.27You Save: $37.35 (40%)
OEM (Genuine) 2008 Cadillac XLR Tensioner
PartNumber: 12599842
Product Specifications- Notes: 4.4 Liter, A/C Belt
- Other Names: Tensioner
- Item Dimensions: 6.1 x 4.0 x 10.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Tensioner
Vehicle Fitment- 2008 Cadillac XLR | V | 8 Cyl 4.4 L GAS
OEM (Genuine) 2008 Cadillac XLR Tensioner Asm-A/C Compressor Belt
PartNumber: 12590199
Product Specifications- Notes: 4.6 Liter, A/C Belt
- Other Names: Tensioner
- Item Dimensions: 10.0 x 6.7 x 3.5 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12564711
- Part Description: 2008 Cadillac XLR Tensioner Asm-A/C Compressor Belt
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac XLR Tensioner Asm-Drive Belt
PartNumber: 12582465
Product Specifications- Notes: 4.4 Liter, Supercharger Belt; XLR; 4.4L
- Other Names: Serpentine Tensioner, Tensioner
- Item Dimensions: 5.3 x 5.1 x 11.3 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Tensioner Asm-Drive Belt
Vehicle Fitment- 2008 Cadillac XLR | V | 8 Cyl 4.4 L GAS
FAQ for Belt Tensioner Repair
Q: What should be noted in the replacement of the Drive Belt Tensioner-Supercharger?
A:
You should rotate the tensioner in a clockwise direction during belt removal and installation, and ensure that the alignment pin on the rear of the tensioner assembly is aligned with the locating hole on the camshaft actuator housing during installation and torque procedure.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the drive belt tensioner assembly bolt?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the air conditioning compressor belt tensioner bolt?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What should be noted in the replacement of the Air Conditioning Compressor Belt Tensioner?
A:
You should access the bolt from under the vehicle, rotate the tensioner in a clockwise direction during belt removal and installation, relieve the tension, rotate the belt slack downward, remove the drive belt from the air conditioning compressor pulley, and do not pinch the belt between the tensioner pulley and the air conditioning compressor pulley.
By Bob
GM Specialist
29/10/2022Q: What should be noted in the replacement of the Water Pump and Generator Drive Belt Tensioner?
A:
You should rotate the tensioner in a clockwise direction during belt removal and installation, remove and install the tensioner and bolt as an assembly, and ensure that the alignment pin on the rear of the tensioner assembly is aligned with the locating hole on the camshaft actuator housing during installation and torque procedure.
By Bob
GM Specialist
29/10/2022