< Back ×
My Vehicle Change Vehicle
2008 Cadillac XLR
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Prices
OEM (Genuine) 2008 Cadillac XLR Valve Cover
PartNumber: 12591269
Product Specifications- Notes: 4.6 Liter; 4.4 Liter; XLR; Right
- Location: Passenger Side
- Other Names: Valve Cover
- Item Dimensions: 29.0 x 9.0 x 13.6 inches
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Valve Cover
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac XLR Cover Asm-Camshaft
PartNumber: 12591268
Product Specifications- Notes: 4.6 Liter; 4.4 Liter; XLR; Left
- Location: Driver Side
- Other Names: Valve Cover
- Item Dimensions: 29.0 x 8.7 x 12.9 inches
- Item Weight: 5.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Cover Asm-Camshaft
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Valve Cover Repair
Q: What is the recommended torque for the oil level indicator tube bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Camshaft Cover-Left Side?
A:
You should remove the engine sight shield, the air cleaner assembly, the front section of the supercharger inlet duct assembly, the left bank ignition coils as an assembly, the bolt connecting the ground strap to the left rear corner of the camshaft cover, the bolt securing the oil level indicator tube to the left cylinder head and reposition the tube away from the camshaft cover, the camshaft cover bolts and the camshaft cover.
By Bob
GM Specialist
01/11/2022Q: How to install the Camshaft Cover-Left Side?
A:
You should install the camshaft cover bolts installing the ground strap to the camshaft cover, the left bank ignition coil assembly, the positive crankcase ventilation (PCV) fresh air tube to the left camshaft cover, the front section of the supercharger inlet duct assembly, the air cleaner assembly and the engine sight shield.
By Bob
GM Specialist
01/11/2022Q: How to install the Camshaft Cover-Right Side?
A:
You should install the camshaft cover gasket as required, the camshaft cover, the camshaft cover bolts installing the ground strap to the camshaft cover, the right bank ignition coil assembly, the front section of the supercharger inlet duct assembly, and the engine sight shield.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the camshaft cover bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Camshaft Cover-Right Side?
A:
You should remove the engine sight shield, the front section of the supercharger inlet duct assembly, the right bank ignition coils as an assembly, the bolt connecting the ground strap to the right rear of the camshaft cover, the camshaft cover bolts, and the camshaft cover.
By Bob
GM Specialist
01/11/2022See more FAQs (1)