< Back ×
My Vehicle Change Vehicle
2008 Cadillac XLR
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Prices
OEM (Genuine) 2008 Cadillac XLR Filler Cap O-Ring
PartNumber: 12572638
Product Specifications- Notes: Xlr
- Other Names: Filler Cap O-Ring, Valve Lifters
- Item Dimensions: 3.1 x 3.0 x 3.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 12686787
- Part Description: 2008 Cadillac XLR Filler Cap O-Ring
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$12.98 MSRP:$21.49You Save: $8.51 (40%)
OEM (Genuine) 2008 Cadillac XLR Valve Springs
PartNumber: 12565199
Product Specifications- Notes: Xlr
- Other Names: Valve Spring
- Item Dimensions: 2.2 x 1.6 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Valve Springs
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$1.76 MSRP:$2.78You Save: $1.02 (37%)
FAQ for Valve Spring Repair
Q: How to remove the Valve Stem Oil Seal and Valve Spring-Right Side?
A:
You should remove the right camshafts, and the starter motor, install the EN 46326 flywheel holder, remove the spark plug from the cylinder being worked on, install the base plate of the J 44211 over the spark plug hole of the cylinder to be serviced, the J 39313 in the spark plug hole, and the arm and swivel nut of the J 44211 over the stud corresponding to the valve to be serviced, and remove the valve spring retainer and valve spring.
By Bob
GM Specialist
02/11/2022Q: How to install the Valve Stem Oil Seal and Valve Spring-Left Side?
A:
You should install the valve spring and valve spring retainer, remove the swivel nut and arm of the J 44211, install the arm and swivel nut of the J 44211 over the stud of any other valves being serviced and repeat these removal and installation steps, remove the J 39313 from the spark plug hole, and the base plate of the J 44211, install the spark plug, and the left camshafts, and remove the EN 46326 flywheel holder and the starter motor.
By Bob
GM Specialist
02/11/2022Q: How to remove the Valve Stem Oil Seal and Valve Spring-Left Side?
A:
You should remove the left camshafts, and the starter motor, install the EN 46326 flywheel holder, remove the spark plug from the cylinder being worked on, install the base plate of the J 44211 over the spark plug hole of the cylinder to be serviced, the J 39313 in the spark plug hole, and the arm and swivel nut of the J 44211 over the stud corresponding to the valve to be serviced, and remove the valve spring retainer and valve spring.
By Bob
GM Specialist
02/11/2022Q: How to install the Valve Stem Oil Seal and Valve Spring-Right Side?
A:
You should install the valve spring retainer and valve spring, remove the swivel nut and arm of the J 44211, the J 39313 from the spark plug hole, and the base plate of the J 44211, install the spark plug and the right camshafts, remove the EN 46326 flywheel holder tool and install the starter motor.
By Bob
GM Specialist
02/11/2022