2008 Cadillac XLR Valve Stem Oil Seal

You should install the valve spring and valve spring retainer, remove the swivel nut and arm of the J 44211, install the arm and swivel nut of the J 44211 over the stud of any other valves being serviced, repeat these removal and installation steps, remove the J 39313 from the spark plug hole, and the base plate of the J 44211, install the spark plug and the left camshafts, remove the EN 46326 flywheel holder and install the starter motor.

You should remove the right camshafts and the starter motor, install the EN 46326 flywheel holder, remove the spark plug from the cylinder being worked on, install the base plate of the J 44211 over the spark plug hole of the cylinder to be serviced, the J 39313 in the spark plug hole, and the arm and swivel nut of the J 44211 over the stud corresponding to the valve to be serviced, and remove the valve spring retainer and valve spring.

You should remove the left camshafts, and the starter motor, install the EN 46326 flywheel holder, remove the spark plug from the cylinder being worked on, install the base plate of the J 44211 over the spark plug hole of the cylinder to be serviced, the J 39313 in the spark plug hole, and the arm and swivel nut of the J 44211 over the stud corresponding to the valve to be serviced, and remove the valve spring retainer and valve spring.

You should install the valve spring retainer and valve spring, remove the swivel nut and arm of the J 44211, the J 39313 from the spark plug hole, and the base plate of the J 44211, install the spark plug, and the right camshafts, remove the EN 46326 flywheel holder tool and install the starter motor.