< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Avalanche
< Back to View All
Transmissions Components & Shifters
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Avalanche Shift Control Cable
PartNumber: 19177018
Product Specifications- Notes: Avalanche; 2WD
- Item Dimensions: 19.5 x 19.4 x 4.1 inches
- Item Weight: 0.40 Pounds
- Replaces: 15945095
- Part Description: 2008 Chevrolet Avalanche Shift Control Cable
Vehicle Fitment- 2008 Chevrolet Avalanche | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$95.88 MSRP:$152.18You Save: $56.30 (37%)OEM (Genuine) 2008 Chevrolet Avalanche Cable Kit, Automatic Transmission Range Selector Lever
PartNumber: 19177017Product Specifications- Notes: Avalanche; 4WD
- Item Dimensions: 18.0 x 18.1 x 5.3 inches
- Item Weight: 0.40 Pounds
- Replaces: 15945094
- Part Description: 2008 Chevrolet Avalanche Cable Kit, Automatic Transmission Range Selector Lever
Vehicle Fitment- 2008 Chevrolet Avalanche | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Automatic Transmission Shifter Cable Repair
Q: What is the range selector lever cable installation procedure?
A:
First install the cable to the vehicle, the cable grommet to the floor panel, and the range selector cable to the support. Next, install the cable to the steering column bracket and the cable end to the steering column ball stud. After that install the driver's seat and the instrument panel knee bolster. Finally, install the range selector cable end to the transmission range selector lever ball stud and the cable clip on the transfer case.
By Bob
GM Specialist
28/02/2022Q: What is the range selector lever cable service procedure?
A:
First apply the park brake, shift the transmission into neutral, and raise the vehicle. Next, remove the transmission range selector cable from the range selector cable bracket. Tighten the transmission range selector cable bracket bolts to 25 Nm.
By Omar
GM Specialist
28/02/2022Q: What should be done before servicing the Range Selector Lever Cable?
A:
You will need to place the transmission manual shaft lever in the park (P) position.
By Omar
GM Specialist
24/02/2022Q: What should I avoid doing when installing the transmission end?
A:
Be sure not to hold the transmission during this operation, this will result in a mid-adjusted cable.
By Bob
GM Specialist
23/02/2022Q: Will the vehicle need to be lifted?
A:
Yes, you will need to lift and support the vehicle.
By Bob
GM Specialist
21/02/2022