< Back ×
2008 Chevrolet Colorado Fuel Tank Pressure Sensor
My Vehicle Change Vehicle
2008 Chevrolet Colorado
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
$34.97Product Specifications- UPC: 724620074202
- Part Description: 2008 Chevrolet Colorado Fuel Tank Pressure Sensor
Vehicle Fitment- 2008 Chevrolet Colorado | All Trims | 4 Cyl 2.9L
- 2008 Chevrolet Colorado | All Trims | 5 Cyl 3.7L
$27.96Product Specifications- UPC: 724620052996
- Part Description: 2008 Chevrolet Colorado Fuel Tank Pressure Sensor
Vehicle Fitment- 2008 Chevrolet Colorado | All Trims | 4 Cyl 2.9L
- 2008 Chevrolet Colorado | All Trims | 5 Cyl 3.7L
$48.11 MSRP:$101.06You Save: $52.95 (53%)Product Specifications- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22678829, 09377680, 12219388, 16196060, 9377680, 12206740, 16217059, 16257276
- Part Description: 2008 Chevrolet Colorado Sensor, Fuel Tank Pressure
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
FAQ for Fuel Tank Pressure Sensor Repair
Q: What is the installation procedure for the
A:
Lightly lubricate the sensor seal with clean engine oil. Press the sensor fully into the fuel tank module. Connect the chassis wiring harness electrical connector to the pressure sensor. Install the left rear pickup box wheelhouse liner. If the vehicle is a crew cab, install the fuel tank. Lower the vehicle.
By Bob
GM Specialist
20/02/2022Q: What should be done before servicing the Fuel Tank Pressure Sensor?
A:
Raise and support the vehicle, high enough to access the top of the fuel tank through the wheelhouse liner.
By Bob
GM Specialist
10/02/2022Q: What should be noticed when installing the fuel pump module?
A:
Always replace the fuel module seal when installing the fuel pump module. Replace the lock ring if necessary. Do not apply any type of lubrication in the seal groove. Ensure the lock ring is installed with the correct side facing upward. A correctly installed lock ring will only turn in a clockwise direction.
By Bob
GM Specialist
10/02/2022Q: What special tool will I need when servicing the Fuel Tank Pressure Sensor?
A:
You will need a fuel sender lock ring tool.
By Bob
GM Specialist
09/02/2022