Notes: Corvette; W/O Z06; Manual Trans; Sport Suspension; Base & 427, Manual Trans, Fe3: Sport Susp
Other Names: Leaf Spring, Spring
Item Dimensions: 50.3 x 7.2 x 4.3 inches
Item Weight: 10.20 Pounds
Fitment Type: Direct Replacement
Replaces: 15233396
Part Description: 2008 Chevrolet Corvette Front Spring Assembly
More Info
Vehicle Fitment
2008 Chevrolet Corvette | 427, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Part Description: 2008 Chevrolet Corvette Rear Spring Assembly
More Info
Vehicle Fitment
2008 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Coil Springs Repair
Q: What should be noted when servicing the suspension spring?
A:
You should take care to avoid chipping or cracking the spring coating when handling the front suspension coil spring. Failure to observe this notice may result in spring breakage.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the parking brake rear cable?
A:
You can install the rear Parking Brake Cable, the rear parking brake cable retainer nut, connect the rear park brake cable, connect the rear park brake cable, install the right-hand (RH) muffler, and then enable the parking brake automatic adjuster.
Q: What is the installation procedure for the steering column lock?
A:
The procedure is to install the control module to the retaining bracket on the Steering Column, connect the electrical connector to the lock module, install the I/P assembly, enable the supplemental inflatable restraint (SIR) system and then program the lock control module.
Q: What is the installation procedure for the steering knuckle?
A:
The procedure is to install the Steering Knuckle to the upper control arm and the lower control arm, the steering linkage outer tie rod ball stud, the stabilizer shaft link, the brake rotor and caliper, and the tire and wheel assembly.