2008 Chevrolet Corvette Window Regulator

You can install the nuts to the motor studs, the regulator channel studs through the holes in the door, the nuts to the regulator channel studs, the regulator rose bud clip to the door, the window, the plugs, the uppermost screw mounting the speaker assembly to the door, the remaining screws in a criss-cross pattern, the water deflector, the door trim panel, and the access plugs into the bottom of the door.

You can remove the door trim panel, the water deflector, the radio speaker assembly from the door, the plugs from the window clamp sight access holes, the door window, the front plug from under the bottom of the door, the nuts from the regulator lower channel studs, the nuts from the regulator motor studs, the regulator rose bud clip from the door, the nuts from the upper regulator channel studs and the regulator through the door inner opening.

The recommended torque is 10 N.m (89 lb in).