< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Impala
< Back to View All
Air Bag
- Department
- Brands
- Prices
OEM (Genuine) 2008 Chevrolet Impala Clock Spring
PartNumber: 19258035
Product Specifications- Notes: W/Cruise Cntrl;W/O Cruise Cntrl
- Other Names: Clock Spring
- Item Dimensions: 9.6 x 6.3 x 5.3 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19179708, 19133679
- Part Description: 2008 Chevrolet Impala Clock Spring
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$229.85 MSRP:$346.70You Save: $116.85 (34%)
Dorman® OE Solutions Air Bag Clockspring for 2008 Chevrolet Impala
PartNumber: 525-026Product Specifications- Notes: w/Manual Reclining Front Seats
- Material: Plastic
- OE Part Number: 19258035
- Package Quantity: 1
- UPC: 019495512196
- Part Description: 2008 Chevrolet Impala OE Solutions Air Bag Clockspring
Vehicle Fitment- 2008 Chevrolet Impala | All Trims | All Engines
$131.51
FAQ for Air Bag Clockspring Repair
Q: What should be noticed when installing the inflatable restraint steering wheel module coil?
A:
You must not remove the centering tab from the new SIR coil until the installation is complete. If the SIR coil does not come with a centering tab, you must center the SIR coil.
By Bob
GM Specialist
01/11/2022Q: What should be done if a double wire harness strap is installed onto the wire harness assembly and column?
A:
You must reuse the holder for the wire straps during installation and remove the wire harness strap(s) where necessary.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when centering the SIR coil?
A:
The new SIR coil assembly will be centered. Improper alignment of the SIR coil assembly may damage the unit, causing an inflatable restraint malfunction.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when removing the inflatable restraint steering wheel module coil?
A:
The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering column or intermediate shaft from the steering gear.
By Bob
GM Specialist
01/11/2022Q: What should be verified before removing the SIR coil?
A:
You will need to ensure that the wheels on the vehicle are straight ahead and that J 42640 is installed or the ignition switch is in the LOCK position.
By Bob
GM Specialist
01/11/2022