< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Impala
< Back to View All
Ignition, Distributors & ECM
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Impala PCM
PartNumber: 12612384
Product Specifications- Notes: 3.5 & 3.9 Liter; 5.3 Liter; Impala, Monte Carlo; 3.5L, 3.9L
- Other Names: ECM, PCM
- Item Dimensions: 11.2 x 7.5 x 3.3 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Impala PCM
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
$252.49 MSRP:$475.42You Save: $222.93 (47%)
OEM (Genuine) 2008 Chevrolet Impala PCM
PartNumber: 12678511
Product Specifications- Notes: Impala, Monte Carlo; 5.3L
- Other Names: ECM, PCM
- Item Dimensions: 8.2 x 7.3 x 4.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12607096, 12636660
- Part Description: 2008 Chevrolet Impala PCM
Vehicle Fitment- 2008 Chevrolet Impala | LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$278.36 MSRP:$524.24You Save: $245.88 (47%)
FAQ for Engine Control Module Repair
Q: What should be noticed when installing or removing the ECM connectors?
A:
You will need to always turn the ignition off when installing or removing the ECM connectors to prevent damage to the components.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when you discharge the powertrain control module?
A:
You should not touch the connector pins or soldered components on the circuit board to prevent possible electrostatic discharge (ESD) damage to the PCM.
By Bob
GM Specialist
01/11/2022Q: Can I touch the connector pins or the soldered components on the circuit board?
A:
No, you cannot. To prevent any possible electrostatic discharge damage to the ECM, you must not touch the connector pins or the soldered components on the circuit board.
By Bob
GM Specialist
01/11/2022Q: What should be noticed during fuel composition diagnosis?
A:
You will need to turn off the key for at least 30 seconds after the parameter displays inactive to properly store the ethanol learned value in the ECM/PCM memory.
By Bob
GM Specialist
01/11/2022