< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Impala
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Impala Valve Springs
PartNumber: 12482062
Product Specifications- Notes: Impala, Monte Carlo; Exhaust
- Other Names: Valve Seal, Valve Spring
- Item Dimensions: 4.4 x 2.8 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Impala Valve Springs
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
$38.85 MSRP:$64.30You Save: $25.45 (40%)OEM (Genuine) 2008 Chevrolet Impala Valve Lifters
PartNumber: 17122490
Product Specifications- Notes: Impala, Monte Carlo
- Other Names: Valve Lifters
- Item Dimensions: 8.8 x 3.1 x 1.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5234670, 05234670
- Part Description: 2008 Chevrolet Impala Valve Lifters
Vehicle Fitment- 2008 Chevrolet Impala | Base, LS, LS Sport, Police, SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
$35.61 MSRP:$58.94You Save: $23.33 (40%)OEM (Genuine) 2008 Chevrolet Impala Valve Springs
PartNumber: 12600774
Product Specifications- Notes: Impala, Monte Carlo
- Other Names: Valve Spring
- Item Dimensions: 3.7 x 2.7 x 1.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12595094
- Part Description: 2008 Chevrolet Impala Valve Springs
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$7.21 MSRP:$11.45You Save: $4.24 (38%)OEM (Genuine) 2008 Chevrolet Impala Valve Springs
PartNumber: 12706568
Product Specifications- Notes: Impala, Monte Carlo
- Other Names: Valve Spring
- Item Dimensions: 3.6 x 3.2 x 2.7 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12589774, 12553696
- Part Description: 2008 Chevrolet Impala Valve Springs
Vehicle Fitment- 2008 Chevrolet Impala | SS | 8 Cyl 5.3 L GAS
$4.54 MSRP:$7.20You Save: $2.66 (37%)
FAQ for Valve Spring Repair
Q: What's the proper way to remove the valve stem oil seal and valve spring?
A:
The proper way is to remove the spark plug, and the rocker arm, install the J 22794 into the spark plug port, using caution so as not to damage the valve spring or valve spring dampener, compress the valve spring using the J 5892-D and the EN-47823, then remove the valve spring cap keys, the valve cap, the valve spring, and the valve stem oil seal.
By Bob
GM Specialist
02/11/2022Q: What should you be careful about when compressing valve springs?
A:
Valve springs can be tightly compressed. You will need to use care when removing retainers and plugs or personal injury could result.
By Bob
GM Specialist
02/11/2022Q: What should be done before removing the valve locks?
A:
Before removing the valve locks, you can rotate the engine so that the piston in the cylinder you are working on is at the top dead center (TDC). This will eliminate the possibility of the valve accidentally falling inside the cylinder. You should also loosen the spark plug, and clean any dirt and/or debris from the spark plug recess area before removing it.
By Bob
GM Specialist
02/11/2022