< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Impala
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Brands
- Prices
OEM (Genuine) 2008 Chevrolet Impala King Pin Screw
PartNumber: 11570339
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 1.4 x 1.0 x 0.6 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11515720
- Part Description: 2008 Chevrolet Impala King Pin Screw
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, Eco, LS, LT, LTZ, Police, Premier, SS | 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$5.05 MSRP:$7.99You Save: $2.94 (37%)
Dorman® OE Solutions Front Wheel Hub Bolt for 2008 Chevrolet Impala
PartNumber: 917-503Product Specifications- Material: Steel
- Package Contents: 3 Bolts
- UPC: 889245012166
- Part Description: 2008 Chevrolet Impala OE Solutions Front Wheel Hub Bolt
Vehicle Fitment- 2008 Chevrolet Impala | All Trims | All Engines
$13.82
OEM (Genuine) 2008 Chevrolet Impala Front Hub
PartNumber: 19259596
Product Specifications- Notes: W/ABS; Impala, Monte Carlo; W/ABS
- Location: Driver Side; Passenger Side
- Item Dimensions: 8.5 x 7.1 x 7.0 inches
- Item Weight: 11.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19433930
- Part Description: 2008 Chevrolet Impala Front Hub
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$219.54 MSRP:$414.26You Save: $194.72 (48%)
OEM (Genuine) 2008 Chevrolet Impala Hub Assembly Stud
PartNumber: 9595178
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 5.0 x 4.0 x 3.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Impala Hub Assembly Stud
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$3.42 MSRP:$5.42You Save: $2.00 (37%)
OEM (Genuine) 2008 Chevrolet Impala Bolt, Rear Wheel Hub
PartNumber: 11610493
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Hub & Bearing Bolt
- Item Dimensions: 2.2 x 1.2 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18023050
- Part Description: 2008 Chevrolet Impala Bolt, Rear Wheel Hub
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$4.54 MSRP:$7.20You Save: $2.66 (37%)
FAQ for Wheel Hub Bolt Repair
Q: What's the removal procedure for the wheel stud?
A:
The removal procedure is to raise and support the vehicle, remove the tire and wheel assembly, remove and support the brake caliper and bracket as an assembly without disconnecting the hydraulic brake hose, remove the brake rotor, rotate the bearing hub to a position where the least amount of interference between the stud and the steering knuckle exists, release the wheel stud from the bearing hub and discard the stud then loosen the wheel bearing/hub assembly retaining bolts enough to walk the bearing away slightly from the knuckle.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the wheel stud?
A:
The installation procedure is to install the NEW stud in the bearing hub, tighten the wheel bearing/hub assembly bolts, if loosened during removal, add enough washers to draw the stud into the hub, install the wheel nut with the flat side against the washers, tighten the wheel nut until the head of the wheel stud is fully seated against the back of the bearing hub flange, remove the wheel nut and the washers, install the brake rotor, and the brake caliper and bracket as an assembly, install the tire and wheel assembly then lower the vehicle.
By Bob
GM Specialist
01/11/2022