< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Trailblazer
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2008 Chevrolet Trailblazer Master Cylinder
PartNumber: 15142479
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 12.3 x 7.9 x 6.4 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Master Cylinder
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$52.99 MSRP:$100.00You Save: $47.01 (48%)
Centric® Premium Brake Master Cylinder for 2008 Chevrolet Trailblazer
PartNumber: 130.66055Product Specifications- UPC: 805890100737
- Part Description: 2008 Chevrolet Trailblazer Premium Brake Master Cylinder
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | All Engines
$91.58
Cardone Reman® Remanufactured Master Cylinder for 2008 Chevrolet Trailblazer
PartNumber: 10-3273Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.062"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 1/2 x 20
- UPC: 082617778671
- Part Description: 2008 Chevrolet Trailblazer Remanufactured Master Cylinder
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: How to disassemble the Master Cylinder Overhaul?
A:
First, you should remove the brake master cylinder, the reservoir cap, the diaphragm, the master cylinder reservoir, and the primary piston assembly. In addition, you should plug the cylinder inlet ports and the rear outlet port. Finally, you should discard the primary piston assembly, the piston retainer, and the seals and seal retainer.
By Bob
GM Specialist
01/11/2022Q: What should be noted when adding fluid to the brake master cylinder reservoir?
A:
You should use only Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: What should be noted when removing the fittings with the transparent hoses from the master cylinder ports?
A:
You should wrap the master cylinder with a clean shop cloth to prevent brake fluid spills.
By Bob
GM Specialist
01/11/2022Q: How to install the Master Cylinder?
A:
First, you should install the master cylinder assembly and remove the rubber plugs. Next, you should connect the brake pipes and the master cylinder fluid level sensor connector. Finally, you should bleed the hydraulic brakes system.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the brake pipe fittings?
A:
The recommended torque is 32 N.m (24 LB-FT).
By Bob
GM Specialist
01/11/2022Q: How to remove the Master Cylinder?
A:
First, you should apply the parking brake. Next, you should disconnect the master cylinder fluid level sensor connector and the brake pipes. Then, you should plug the brake pipes, remove the master cylinder assembly, and drain the master cylinder of brake fluid.
By Bob
GM Specialist
01/11/2022Q: How to remove the Master Cylinder Reservoir?
A:
First, you should remove the brake master cylinder assembly and drain the brake fluid. In addition, you should remove the reservoir and the seals. Finally, you should clean and dry the master cylinder.
By Bob
GM Specialist
01/11/2022Q: How to assemble the Master Cylinder Overhaul?
A:
First, you should clean and dry the master cylinder. Next, you should install the lubricated return spring and secondary piston assembly, the master cylinder reservoir, the reservoir cap, the diaphragm, and the master cylinder.
By Bob
GM Specialist
01/11/2022Q: How to install the Master Cylinder Reservoir?
A:
First, you should install the lubricated seals and the reservoir. Next, you should remove the brake master cylinder from the vise and install it.
By Bob
GM Specialist
01/11/2022Q: What should be noted when removing the Master Cylinder Reservoir?
A:
You should be careful not to clamp on the master cylinder body.
By Bob
GM Specialist
01/11/2022See more FAQs (5)