< Back ×
2008 Chevrolet Trailblazer Driveshaft
My Vehicle Change Vehicle
2008 Chevrolet Trailblazer
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2008 Chevrolet Trailblazer
PartNumber: 65-1011$491.43Product Specifications- Notes: with 43-5/8" (1108 mm) Long Driveshaft;Supplied as new; Measurement is taken from end of input shaft to center of U-Joint
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: No
- Length (in): 43.625
- Length (mm): 1108
- Measurement Method: Measurement is Taken from End of Input Shaft to Center of U-Joint
- Product Condition: New
- Tubing Outer Diameter (in): 2.75
- Tubing Outer Diameter (mm): 70
- Part Description: 2008 Chevrolet Trailblazer Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | 6 Cyl 4.2L
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2008 Chevrolet Trailblazer
PartNumber: 65-9398$390.97Product Specifications- Notes: with 35-5/8" (904 mm) Long Driveshaft;Supplied as new; Measurement is taken from U-Joint to end of CV Dust Shield
- Greasable: Yes
- Length: 35.625"
- Length (mm): 904
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2008 Chevrolet Trailblazer Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | 6 Cyl 4.2L
$385.69 MSRP:$615.16You Save: $229.47 (38%)Product Specifications- Notes: S-Series
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 5.2 x 5.1 x 35.7 inches
- Item Weight: 19.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Axle Assembly
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$373.54 MSRP:$593.06You Save: $219.52 (38%)Product Specifications- Notes: All Models; S-Series
- Other Names: Axle Shaft, Intermed Shaft
- Item Dimensions: 13.3 x 4.4 x 4.3 inches
- Item Weight: 4.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Intermed Shaft
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Product Specifications- Notes: Short Wheel Base; Bravada/Envoy/Trailblazer; 113" Wheelbase; Right; 3.42 Ratio; W/Limited Slip;Bravada/Envoy/Trailblazer; 113" Wheelbase; Right; 3.73 Ratio; W/Limited Slip;Bravada/Envoy/Trailblazer; 113" Wheelbase; Right; 3.73 Ratio; W/O Limited Slip; 5.3l
- Location: Passenger Side
- Other Names: Axle, Axle Shaft
- Item Dimensions: 33.3 x 6.7 x 6.6 inches
- Item Weight: 20.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479161
- Part Description: 2008 Chevrolet Trailblazer Rear Axle Drive Shaft (Rh)
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Product Specifications- Notes: Bravada/Envoy/Trailblazer; 4WD; 113" Wheelbase; 4.2l
- Other Names: Drive Shaft
- Item Dimensions: 50.5 x 3.9 x 3.9 inches
- Item Weight: 17.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15188012, 15152332
- Part Description: 2008 Chevrolet Trailblazer Propeller Shaft
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
- Product Specifications
- Notes: Bravada/Envoy/Trailblazer; 2WD; 129" Wheelbase; 5.3l; W/O Envoy Xuv
- Other Names: Drive Shaft
- Item Dimensions: 9.5 x 5.6 x 5.7 inches
- Item Weight: 5.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Front Axle Propeller Shaft Assembly
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LT | 8 Cyl 5.3 L GAS
Product Specifications- Notes: Bravada/Envoy/Trailblazer; 113" Wheelbase; Right; 4.10 Ratio; 4l70e Trans
- Other Names: Axle, Axle Shaft
- Item Dimensions: 42.1 x 10.6 x 10.8 inches
- Item Weight: 33.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Rear Axle Drive Shaft
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2008 Chevrolet Trailblazer Front Differential Carrier (3.73 Ratio)
PartNumber: 15931324Product Specifications- Notes: 3.73 Ratio; Trailblazer; 3.73 Ratio; S-Series; 3.73 Ratio
- Other Names: Axle, Axle Assembly, Differential Assembly
- Item Dimensions: 21.1 x 20.4 x 12.0 inches
- Item Weight: 44.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15054994, 15292867
- Part Description: 2008 Chevrolet Trailblazer Front Differential Carrier (3.73 Ratio)
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Product Specifications- Notes: Short Wheel Base, W/Limited Slip
- Item Dimensions: 70.3 x 19.9 x 13.4 inches
- Item Weight: 85.70 Pounds
- Replaces: 15842180
- Part Description: 2008 Chevrolet Trailblazer Axle Asm-Rear (4.10 Ratio)
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Short Wheel Base, W/O Limited Slip
- Other Names: Axle Assembly
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Rear Axle Assembly (3.73 Ratio)
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2008 Chevrolet Trailblazer Front Differential Carrier Assembly (3.42 Ratio)
PartNumber: 15931322Product Specifications- Notes: 3.42 Ratio; Trailblazer; 3.42 Ratio; S-Series; 3.42 Ratio
- Other Names: Axle, Axle Assembly, Differential Assembly
- Item Dimensions: 17.9 x 19.6 x 12.8 inches
- Item Weight: 45.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15292866, 15054995
- Part Description: 2008 Chevrolet Trailblazer Front Differential Carrier Assembly (3.42 Ratio)
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2008 Chevrolet Trailblazer Front Differential Carrier Assembly (4.10 Ratio)
PartNumber: 15931325Product Specifications- Notes: 4.10 Ratio; Trailblazer; 4.10 Ratio; S-Series; 4.10 Ratio
- Other Names: Axle, Axle Assembly, Differential Assembly
- Item Dimensions: 21.3 x 19.8 x 11.6 inches
- Item Weight: 45.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Front Differential Carrier Assembly (4.10 Ratio)
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Product Specifications- Notes: Bravada/Envoy/Trailblazer; 113" Wheelbase; Left; 3.42 Ratio; W/O Limited Slip;Bravada/Envoy/Trailblazer; 113" Wheelbase; Left; 3.73 Ratio; W/O Limited Slip; 4.2l
- Other Names: Axle Shaft
- Item Dimensions: 34.3 x 6.9 x 7.0 inches
- Item Weight: 18.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479016
- Part Description: 2008 Chevrolet Trailblazer Rear Axle Drive Shaft
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Bravada/Envoy/Trailblazer; 113" Wheelbase; Right; 3.42 Ratio; W/O Limited Slip;Bravada/Envoy/Trailblazer; 113" Wheelbase; Right; 3.73 Ratio; W/O Limited Slip; 4.2l;Bravada/Envoy/Trailblazer; 113" Wheelbase; Right; 4.10 Ratio; 4l60e Trans
- Other Names: Axle Shaft
- Item Dimensions: 34.6 x 6.7 x 7.0 inches
- Item Weight: 19.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479017
- Part Description: 2008 Chevrolet Trailblazer Rear Axle Drive Shaft
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Product Specifications- Notes: Short Wheel Base; Bravada/Envoy/Trailblazer; 113" Wheelbase; Left; 3.42 Ratio; W/Limited Slip;Bravada/Envoy/Trailblazer; 113" Wheelbase; Left; 3.73 Ratio; W/Limited Slip
- Location: Driver Side
- Other Names: Axle, Axle Shaft
- Item Dimensions: 34.2 x 6.9 x 6.9 inches
- Item Weight: 21.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479160
- Part Description: 2008 Chevrolet Trailblazer Rear Axle Drive Shaft (Lh)
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Bravada/Envoy/Trailblazer; 2WD; 113" Wheelbase; 4.2l
- Other Names: Drive Shaft
- Item Dimensions: 58.7 x 4.2 x 4.2 inches
- Item Weight: 15.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15152336
- Part Description: 2008 Chevrolet Trailblazer Propeller Shaft Assembly
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
- Product Specifications
- Notes: Bravada/Envoy/Trailblazer; 2WD; 113" Wheelbase; 5.3l
- Other Names: Drive Shaft
- Item Dimensions: 60.7 x 4.3 x 4.3 inches
- Item Weight: 15.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Propeller Shaft Assembly
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT | 8 Cyl 5.3 L GAS
- Product Specifications
- Notes: Bravada/Envoy/Trailblazer; 4WD; 113" Wheelbase; 5.3l
- Other Names: Drive Shaft
- Item Dimensions: 48.6 x 4.0 x 3.9 inches
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Propeller Shaft Assembly
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT | 8 Cyl 5.3 L GAS
- Product Specifications
- Notes: Bravada/Envoy/Trailblazer; 2WD; 113" Wheelbase; 6.0l;Bravada/Envoy/Trailblazer; 4WD; 113" Wheelbase; 6.0l
- Other Names: Drive Shaft
- Fitment Type: Direct Replacement
- Replaces: 15233115
- Part Description: 2008 Chevrolet Trailblazer Propeller Shaft Assembly
Vehicle Fitment- 2008 Chevrolet Trailblazer | SS | 8 Cyl 6.0 L GAS
FAQ for Driveshaft Repair
Q: What is the recommended torque for the yoke retainers and the bolts?
A:
The recommended torque is 20 N.m (15 lb-ft).
By Bob
GM Specialist
29/10/2022Q: How to install the Front Propeller Shaft?
A:
You should install the propeller shaft, the yoke retainers, and the steering gear crossmember. In addition, you should align the reference marks made during removal.
By Bob
GM Specialist
29/10/2022Q: What should you do if the pinion yoke is loose?
A:
You should tighten the bolts and the pinion nut to the specified torque.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the front propeller shaft yoke clamp bolts?
A:
The recommended torque is 20 N.m (15 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What should you do if one or more of the universal joints are worn or damaged?
A:
You should replace the universal joint.
By Bob
GM Specialist
29/10/2022Q: What should you do if the center bearing is dry or worn?
A:
You should lube or replace the center bearing.
By Bob
GM Specialist
29/10/2022Q: What should you do if the yoke retainer strap bolts are loose?
A:
You should tighten the yoke retainer strap bolts to specifications.
By Bob
GM Specialist
29/10/2022Q: What should you do if the side gear hub counterbore in the differential is worn too much?
A:
You should replace the differential case and/or the side gears.
By Bob
GM Specialist
29/10/2022Q: How to remove the Front Propeller Shaft?
A:
First, you should remove the steering gear crossmember, and mark the relationship of the propeller shaft to the front axle pinion yoke. Next, you should remove the yoke retainer and disconnect the propeller shaft. Finally, the front propeller shaft should be removed.
By Bob
GM Specialist
29/10/2022Q: What special tools will be used in the replacement of the Drive/Propeller Shaft?
A:
The J 9522-3 U Joint Bearing Separator and the J 9522-5 U Joint Bearing Spacer Remover shall be used for the replacement of the Drive/Propeller Shaft.
By Bob
GM Specialist
29/10/2022See more FAQs (10)