< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Trailblazer
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2008 Chevrolet Trailblazer Manifold
PartNumber: 12580420
Product Specifications- Notes: All Models; 5.3L;All Models; 6.0L
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 28.8 x 18.8 x 12.5 inches
- Item Weight: 17.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Manifold
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, SS | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$185.36 MSRP:$295.65You Save: $110.29 (38%)
Dorman® Plastic Intake Manifold for 2008 Chevrolet Trailblazer
PartNumber: 615-568Product Specifications- Notes: 1 Pc
- Air Conditioning Compressor Mount: No
- Alternator Mount: No
- Color: Black
- EGR Ready: No
- Gasket or Seal Included: Yes
- Grade Type: Regular
- Heated Choke Port: No
- High-Riser: No
- Intake Manifold Material: Plastic, Nylon
- Manifold Height: 7"
- Material: Plastic
- OE Part Number: 89060570
- Plenum Style: Single Plane
- Port Outlet Dimensions: 2 x 1.5"
- Port Quantity: 6
- UPC: 019495386674
- Part Description: 2008 Chevrolet Trailblazer Plastic Intake Manifold
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | 6 Cyl 4.2L
$241.47
OEM (Genuine) 2008 Chevrolet Trailblazer Manifold Asm, Intake (Service)
PartNumber: 89060570
Product Specifications- Notes: All Models; 4.2L
- Other Names: Intake Manifold
- Item Dimensions: 34.8 x 15.4 x 11.3 inches
- Item Weight: 5.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Manifold Asm, Intake (Service)
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LT | 6 Cyl 4.2 L GAS
FAQ for Intake Manifold Repair
Q: What is the recommended torque for the engine harness bracket nut?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Upper Intake Manifold Sight Shield (6.0L)?
A:
First, you should install the sight shield ball stud, the sight shield retainer, and the bolts. Next, you should seat the sight shield onto the ball stud and press down over the stud. Finally, you should tighten the intake manifold sight shield wing nut.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the sight shield ball stud?
A:
The recommended torque is 5 N.m (44 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the generator bolt?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Intake Manifold (6.0L)?
A:
You should install a new intake manifold, the drive belt, the engine harness bracket nut, the vacuum brake booster hose, the EVAP purge solenoid vent tubes, the PCV hose, the left side CPA retainer, and the fuel fill cap. In addition, you should connect the fuel feed pipe, the engine wiring harness electrical connector, the side engine wiring harness electrical connector, and the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the sight shield retainer bolts?
A:
The recommended torque is 3 N.m (26 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (1)