< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Trailblazer
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Trailblazer Adjust Switch
PartNumber: 12451439
Product Specifications- Notes: Driver Seat, W/Power, Seat Adjuster, All; Driver Seat; Bravada/Envoy/Trailblazer
- Location: Driver Side
- Item Dimensions: 7.2 x 7.2 x 6.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89043625
- Part Description: 2008 Chevrolet Trailblazer Adjust Switch
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$112.05 MSRP:$169.02You Save: $56.97 (34%)
OEM (Genuine) 2008 Chevrolet Trailblazer Lumbar Switch
PartNumber: 19121422
Product Specifications- Notes: Passenger Seat, W/Power, Lumbar Adjust, All; Driver Seat, W/Power, Lumbar, 2-Way
- Location: Passenger Side; Driver Side
- Other Names: Control Switch, Lumbar Switch, Seat Switch, Switch
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Lumbar Switch
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$67.93 MSRP:$106.81You Save: $38.88 (37%)
OEM (Genuine) 2008 Chevrolet Trailblazer Switch, Passenger Seat Adjuster & Reclining
PartNumber: 12451440
Product Specifications- Notes: Passenger Seat, W/Power, Seat Adjust; Passenger Seat
- Location: Passenger Side
- Item Dimensions: 4.2 x 4.0 x 2.2 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89042262
- Part Description: 2008 Chevrolet Trailblazer Switch, Passenger Seat Adjuster & Reclining
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Power Seat Switch Repair
Q: How to install the Memory Seat Control Module?
A:
First, you should install the following parts: the locating tabs, the screw that retains the seat control module to the seat pan, and the seat pan to the seat assembly. In addition, you should connect the electrical connectors to the seat control module.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the screw that retains the seat control module to the seat pan?
A:
The recommended torque is 3 N.m (26 lb in).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the seat belt buckle bolt?
A:
The recommended torque is 55 N.m (41 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Driver Seat Adjuster Memory Switch?
A:
First, you should position the memory seat switch to the lock and door lock, and side window switch. Next, you should connect the electrical connector to the memory seat switch. In addition, you should install the door lock and side window switch.
By Bob
GM Specialist
01/11/2022Q: How to install the Front Seat Lumbar Control Switch?
A:
First, you should connect the electrical connector. Next, you should install the lumbar switch, the power seat switch, and the switch bezel assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the seat position switch nuts?
A:
The recommended torque is 24 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Power Seat Switch?
A:
You should remove the switch bezel assembly, the buttons, and the seat switch. In addition, you should release the tabs that retain the seat switch to the seat bezel assembly. Next, you should disconnect the electrical connector from the switch.
By Bob
GM Specialist
01/11/2022Q: How to remove the Driver Seat Adjuster Memory Switch?
A:
First, you should release the front retaining clip. Next, you should remove the electrical connector and the memory seat switch.
By Bob
GM Specialist
01/11/2022Q: How to remove the Front Seat Lumbar Control Switch?
A:
First, you should remove the switch bezel assembly and the power seat switch. Next, you should release the tabs that retain the lumbar switch to the switch bezel assembly, disconnect the electrical connector, and remove the lumbar switch.
By Bob
GM Specialist
01/11/2022Q: How to install the Inflatable Restraint Seat Position Sensor?
A:
You should install the following parts: the seat position switch, the seat adjusters, the assist spring, the seat cushion foam pad, the seat belt buckle assembly, the lumbar adjustment mechanism, the lumbar cable, the recliner handle, and the seat. In addition, you should connect the seat belt buckle electrical connector and the wiring harness.
By Bob
GM Specialist
01/11/2022See more FAQs (8)