< Back ×
2008 Ford Fusion Fuel Pump
My Vehicle Change Vehicle
2008 Ford Fusion
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 8
- Flow Rating: 26 gph
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: Yes
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Maximum Pressure: 80.0 PSI
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: Yes
- System Pressure: 65 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604231760
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2008 Ford Fusion Driver Side Fuel Pump Module Assembly
Vehicle Fitment- 2008 Ford Fusion | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer and Tank Seal
- Average Current Draw(A): 10.2
- Average Flow Rating(GPH): 33.5
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Racetrack
- Country of Orign: China
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Performance
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Maximum Pump Pressure (PSI): 70
- Minimum Pump Pressure (PSI): 64
- Mounting Hardware Included: No
- Negative Ground: Yes
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Product Height (in): 8.19
- Product Length (in): 10
- Product Width (in): 8.82
- Pump Type: Turbine
- Regulator Included: Yes
- Resistance Ohms Empty: 180
- Resistance Ohms Full: 10
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 5
- Terminal Type: PIN
- UPC: 00072845114693
- Voltage: 12V
- Weight (lbs): 2.69
- Wire Harness Included: No
- Part Description: 2008 Ford Fusion Fuel Pump Module Assembly
OEM (Genuine) 2008 Ford Fusion Fuel Pump
PartNumber: 8E5Z-9H307-T$214.72 MSRP:$358.18You Save: $143.46 (41%)Product Specifications- Notes: W/O AWD, 3.0 Liter; Fusion, Milan; 3.0l; FWD
- Other Names: Fuel Pump, Fuel Pump Assembly
- Item Dimensions: 10.2 x 11.6 x 10.4 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Ford Fusion Fuel Pump
Vehicle Fitment- 2008 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 9
- Flow Rating: 20 gph
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: Yes
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Maximum Pressure: 80.0 PSI
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: Yes
- System Pressure: 59 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604230787
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2008 Ford Fusion Fuel Pump Module Assembly
Vehicle Fitment- 2008 Ford Fusion | All Trims | 4 Cyl 2.3L
Product Specifications- Average Current Draw(A): 9.9
- Average Flow Rating(GPH): 36.7
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Racetrack
- Country of Orign: China
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Performance
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Maximum Pump Pressure (PSI): 64
- Minimum Pump Pressure (PSI): 59
- Mounting Hardware Included: No
- Negative Ground: Yes
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Product Height (in): 8.62
- Product Length (in): 10
- Product Width (in): 8.82
- Pump Type: Turbine
- Regulator Included: Yes
- Resistance Ohms Empty: 180
- Resistance Ohms Full: 10
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 5
- Terminal Type: PIN
- UPC: 00072845114600
- Voltage: 12V
- Weight (lbs): 2.61
- Wire Harness Included: No
- Part Description: 2008 Ford Fusion Fuel Pump Module Assembly
Vehicle Fitment- 2008 Ford Fusion | All Trims | 4 Cyl 2.3L
Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 10
- Flow Rating: 20 gph
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: Yes
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Maximum Pressure: 78.0 PSI
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: Yes
- System Pressure: 65 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Pin
- UPC: 689604230831
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2008 Ford Fusion Fuel Pump Module Assembly
Vehicle Fitment- 2008 Ford Fusion | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Strainer required to validate the warranty
- Average Current Draw(A): 9
- Average Flow Rating(GPH): 180
- Country of Orign: China
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Maximum Pump Pressure (PSI): 95
- Minimum Pump Pressure (PSI): 85
- Negative Ground: No
- Outlet Quantity: 1
- Outlet Size: 0.346
- Outlet Type: Hose
- Product Height (in): 1.5
- Product Length (in): 4.51
- Product Width (in): 1.5
- Pump Type: Turbine
- Regulator Included: No
- Strainer Included: No
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Chip
- UPC: 00072845115294
- Voltage: 12V
- Weight (lbs): 0.66
- Wire Harness Included: No
- Part Description: 2008 Ford Fusion Electric Fuel Pump Module Assembly
Product Specifications- Notes: W/O AWD, 2.3 Liter; Fusion, Milan; 2.3l
- Other Names: Fuel Pump, Fuel Pump Assembly
- Item Dimensions: 10.2 x 10.7 x 11.4 inches
- Item Weight: 3.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Ford Fusion Fuel Pump
Vehicle Fitment- 2008 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS
Product Specifications- Gasket Included: Y
- Hazardous Material: No
- Inlet Count: 1
- Inlet Type: Strainer
- Item Grade: Standard Replacement
- Maximum Free Flow Rate (gph): 55
- Maximum Pressure Rate (psi): 65
- Minimum Free Flow Rate (gph): 45
- Minimum Pressure Rate (psi): 60
- Outlet Count: 1
- Outlet Size: 3/8"
- Outlet Type: Quick Connect
- Package Contents: Pump & Kit
- Package Quantity: 1
- Warranty: Lifetime Limited Warranty
- Part Description: 2008 Ford Fusion Driver Side In-Tank Fuel Pump Module Assembly
Vehicle Fitment- 2008 Ford Fusion | All Trims | 6 Cyl 3.0L
Product Specifications- Gasket or Seal Included: Yes
- Inlet Attachment: Strainer
- Inlet Type: STRAINER
- Internal or External: Internal
- Internet Product Code (IPC): 39DF952EDFB
- Item Grade: STANDARD REPLACEMENT
- Item has MSDS (SDS): No
- Maximum Pressure (psi): 65
- MFG Brand Name: Airtex Products
- MFG Model # (Series): E2459M
- Minimum Pressure (psi): 65.0
- Outlet Attachment: Quick Connect
- Outlet Type: QUICK CONNECT
- Package Contents: Fuel Pump & Kit
- Package Quantity: 1
- Pump Type: Electrical
- Supplier Company Name: Airtex Products
- UPC: 080044025078
- Wiring Harness Included: No
- Part Description: 2008 Ford Fusion In-Tank Fuel Pump Module Assembly
Vehicle Fitment- 2008 Ford Fusion | All Trims | 4 Cyl 2.3L
Product Specifications- Notes: W/AWD; Fusion, Milan; 3.0l; AWD; Secondary
- Item Dimensions: 9.7 x 5.9 x 8.0 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Ford Fusion Fuel Gauge Sending Unit
Vehicle Fitment- 2008 Ford Fusion | SE, SEL, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: Yes
- In Tank or External: In Tank
- Item Grade: Standard Replacement
- Package Contents: Fuel Transfer Unit with Float Arm, Seal, Instruction Sheet
- Regulator Included: No
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: No
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 689604265017
- Vapor Pressure Sensor: No
- Part Description: 2008 Ford Fusion Fuel Tank Sending Unit
Vehicle Fitment- 2008 Ford Fusion | All Trims | 6 Cyl 3.0L
Product Specifications- Gasket or Seal Included: Yes
- Internal or External: Internal
- Item Grade: STANDARD REPLACEMENT
- Lock Ring Included: No
- Mounting Hardware Included: No
- Package Contents: PUMP & KIT
- Package Quantity: 1
- UPC: 080044062202
- Voltage [V]: 12V
- Part Description: 2008 Ford Fusion Fuel Sender And Hanger Assembly
Vehicle Fitment- 2008 Ford Fusion | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Fusion, Milan; 3.0l; AWD; W/AWD
- Other Names: Fuel Pump, Fuel Pump Assembly
- Item Dimensions: 9.7 x 14.4 x 17.6 inches
- Item Weight: 3.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Ford Fusion Fuel Pump
Vehicle Fitment- 2008 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
Product Specifications- Average Current Draw(A): 8
- Average Flow Rating(GPH): 41
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Trapezoid
- Country of Orign: China
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: FKM
- Grade Type: Regular
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Maximum Pump Pressure (PSI): 65
- Minimum Pump Pressure (PSI): 60
- Mounting Hardware Included: No
- Negative Ground: No
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Product Height (in): 8.82
- Product Length (in): 10.75
- Product Width (in): 8.9
- Pump Type: Turbine
- Regulator Included: Yes
- Resistance Ohms Empty: 180
- Resistance Ohms Full: 10
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: PIN
- UPC: 00072845114853
- Voltage: 12V
- Weight (lbs): 2.78
- Part Description: 2008 Ford Fusion Fuel Pump Module Assembly
Vehicle Fitment- 2008 Ford Fusion | All Trims | 6 Cyl 3.0L