< Back ×
My Vehicle Change Vehicle
2008 GMC Yukon
< Back to View All
Power Steering Pumps
- Department
- Prices
OEM (Genuine) 2008 GMC Yukon Reservoir
PartNumber: 19207053
Product Specifications- Other Names: Reservoir
- Item Dimensions: 9.7 x 8.9 x 6.8 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26045594
- Part Description: 2008 GMC Yukon Reservoir
Vehicle Fitment- 2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$193.93 MSRP:$320.98You Save: $127.05 (40%)
FAQ for Power Steering Reservoir Repair
Q: What should be noticed when you use power steering fluid?
A:
You should always use the proper power steering fluid when you add fluid or make a complete fluid change because failure to use the proper fluid will cause hose and seal damage and fluid leaks.
By Bob
GM Specialist
02/11/2022Q: What should you do in the Power Steering Bleeding: Service and Repair?
A:
You should fill the pump reservoir with fluid to the minimum system level, FULL COLD level, or middle of hash mark on the cap stick fluid level indicator. raise the vehicle until the front wheels are off the ground. key on the engine OFF, turn the steering wheel from stop to stop 12 times. verify power steering fluid level per operating specification. start the engine, rotate steering wheel from left to right and check for sign of cavitation or fluid aeration (pump noise/whining). verify the fluid level.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the power steering pump fitting?
A:
The recommended torque is 75 N.m.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the power steering fluid reservoir studs?
A:
The recommended torque is 58 N.m.
By Bob
GM Specialist
01/11/2022