< Back ×
2009 Buick LaCrosse Brake Line
My Vehicle Change Vehicle
2009 Buick LaCrosse
< Back to View All
Brake Lines & Hoses
- Department
- Prices
Product Specifications- Item Dimensions: 18.7 x 18.4 x 0.4 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26000934, 15618248
- Part Description: 2009 Buick LaCrosse Brake Line
Vehicle Fitment- 2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
Product Specifications- Notes: W/O Super
- Location: Passenger Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 23.5 x 5.7 x 2.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10328412
- Part Description: 2009 Buick LaCrosse Hose Asm-Front Brake
Vehicle Fitment- 2009 Buick LaCrosse | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
Product Specifications- Notes: Lacrosse; Right; W/Super
- Other Names: Flex Hose
- Item Dimensions: 8.9 x 8.2 x 5.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Buick LaCrosse Hose Asm-Front Brake
Vehicle Fitment- 2009 Buick LaCrosse | Super | 8 Cyl 5.3 L GAS
Product Specifications- Notes: W/Super
- Location: Driver Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 8.8 x 8.3 x 5.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Buick LaCrosse Hose Asm-Front Brake
Vehicle Fitment- 2009 Buick LaCrosse | Super | 8 Cyl 5.3 L GAS
Product Specifications- Notes: W/O Super
- Location: Passenger Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 11.4 x 5.2 x 5.0 inches
- Item Weight: 0.70 Pounds
- Replaces: 10356563, 10339179
- Part Description: 2009 Buick LaCrosse Hose Asm-Rear Brake
Vehicle Fitment- 2009 Buick LaCrosse | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
- Product Specifications
- Notes: W/O Super
- Location: Driver Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 11.4 x 4.9 x 5.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10339180, 10356564
- Part Description: 2009 Buick LaCrosse Hose Asm-Rear Brake
Vehicle Fitment- 2009 Buick LaCrosse | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
Product Specifications- Notes: W/Super
- Location: Driver Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 14.0 x 5.0 x 2.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22163799
- Part Description: 2009 Buick LaCrosse Hose Asm-Rear Brake
Vehicle Fitment- 2009 Buick LaCrosse | Super | 8 Cyl 5.3 L GAS
Product Specifications- Notes: W/Super
- Location: Passenger Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 13.3 x 4.9 x 2.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22163798
- Part Description: 2009 Buick LaCrosse Hose Asm-Rear Brake
Vehicle Fitment- 2009 Buick LaCrosse | Super | 8 Cyl 5.3 L GAS
- Product Specifications
- Notes: W/O Super
- Location: Driver Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 6.3 x 4.2 x 12.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15238607, 10328413
- Part Description: 2009 Buick LaCrosse Brake Hose
Vehicle Fitment- 2009 Buick LaCrosse | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
- Product Specifications
- Notes: W/Super
- Location: Passenger Side
- Part Description: 2009 Buick LaCrosse Brake Line
Vehicle Fitment- 2009 Buick LaCrosse | Super | 8 Cyl 5.3 L GAS
FAQ for Brake Line Repair
Q: What are some replacement procedures for the brake pipe?
A:
Some procedures are to inspect the sectioning brake pipe, remove sectioned brake pipe, loosen the thumbwheel, and clean the brake pipe.
By Omar
GM Specialist
23/12/2021Q: What is the installation procedure for the power brake booster vacuum check valve and hose?
A:
The procedure is to install the check valve, connect the vacuum hose and install the fuel injector sight shield.
By Bob
GM Specialist
22/12/2021Q: What is the installation procedure for the front brake hose?
A:
The procedure is to assemble the new cooper hose gaskets, install the brake hose to the brake caliper, and install the retainer onto the hose fitting.
By Bob
GM Specialist
16/12/2021Q: What is the installation procedure for the rear brake hose?
A:
The procedure is to assemble the 4 new cooper hose gaskets, install the brake hose to the brake caliper, and install the retainer onto the hose fitting.
By Bob
GM Specialist
16/12/2021Q: How do you remove the front brake hose?
A:
You can remove the front brake hose by removing the front tire and wheel assembly, cleaning the dirt from the brake hose, and removing the retaining clip and the bolts from the brake hose as well as the 2 cooper hose gaskets.
By Bob
GM Specialist
14/12/2021Q: How do you remove the rear brake hose?
A:
You can remove the rear brake hose by removing the front tire and wheel assembly, cleaning the dirt from the brake hose, and removing the retaining clip and the bolts from the brake hose as well as the 2 cooper hose gaskets.
By Bob
GM Specialist
27/12/2020Q: How do you remove the power brake booster vacuum check valve and hose?
A:
You can remove the vacuum check valve and hose by removing the fuel injector sight shield, disconnecting the vacuum hose, and removing the vacuum brake booster check valve.
By Bob
GM Specialist
24/12/2020See more FAQs (2)