< Back ×
My Vehicle Change Vehicle
2009 Buick LaCrosse
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2009 Buick LaCrosse
PartNumber: 130.62111Product Specifications- UPC: 805890008392
- Part Description: 2009 Buick LaCrosse Premium Brake Master Cylinder
Vehicle Fitment- 2009 Buick LaCrosse | All Trims | All Engines
$80.05
OEM (Genuine) 2009 Buick LaCrosse Cylinder Asm, Brake Master
PartNumber: 19209260
Product Specifications- Notes: W/ABS
- Other Names: Master Cylinder
- Item Dimensions: 9.4 x 7.5 x 9.4 inches
- Item Weight: 2.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18026277, 18060780
- Part Description: 2009 Buick LaCrosse Cylinder Asm, Brake Master
Vehicle Fitment- 2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
Cardone Reman® Remanufactured Master Cylinder for 2009 Buick LaCrosse
PartNumber: 10-2714Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: M12 x 1.0
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: M12 x 1.0
- UPC: 082617378109
- Part Description: 2009 Buick LaCrosse Remanufactured Master Cylinder
Vehicle Fitment- 2009 Buick LaCrosse | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: What is the proper way to assemble the master cylinder?
A:
The proper way is to clean the interior and exterior, dry and lubricate the master cylinder, and install the master cylinder into the vehicle.
By Bob
GM Specialist
30/12/2021Q: What are the procedures for the master cylinder bench bleeding?
A:
The procedures are to secure the mounting flange of the brake master cylinder and remove the cylinder reservoir, transparent hoses, and the master cylinder.
By Bob
GM Specialist
24/12/2021Q: How do you remove the master cylinder for this vehicle?
A:
You can remove the master cylinder by disconnecting the electronic connector from the fluid level sensor as well as the brake pipe fitting, and remove the master cylinder.
By Omar
GM Specialist
21/12/2021Q: How do you disassemble the master cylinder?
A:
You can disassemble the master cylinder by removing the brake master cylinder from the vehicle, the reservoir cap, the cylinder reservoir, and the primary piston.
By Bob
GM Specialist
21/12/2021Q: What if the brake fluid level is at or below the half-full point during fluid checks?
A:
You can inspect for wear or possible fluid leak.
By Bob
GM Specialist
17/12/2021Q: What is the installation procedure for the master cylinder?
A:
The procedure is to bench bleed the master cylinder, install the master cylinder, and connect the brake pipe fittings and brake fluid level sensors.
By Omar
GM Specialist
16/12/2021Q: What is the removal procedure for the master cylinder reservoir?
A:
The procedure is to remove the master cylinder from the vehicle, the brake fluid level sensor, the reservoir, and the seals from the master cylinder.
By Omar
GM Specialist
14/12/2021Q: What should the master cylinder for the 2009 Buick LaCrosse be filled with?
A:
The master cylinder for the 2009 Buick LaCrosse should be filled with Delco Supreme 11 (R).
By Bob
GM Specialist
13/12/2021Q: How do you install the master cylinder reservoir?
A:
You can install the lubricated seals, install the reservoir to the master cylinder, place the fluid sensor into the reservoir and install the master cylinder onto the vehicle.
By Bob
GM Specialist
18/10/2021See more FAQs (4)