< Back ×
My Vehicle Change Vehicle
2009 Buick LaCrosse
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2009 Buick LaCrosse Actuator
PartNumber: 22754988
Product Specifications- Notes: Temp Valve; Inlet Valve
- Other Names: Actuator
- Item Dimensions: 3.6 x 3.6 x 1.5 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10325404, 15249473, 15844096, 10356910, 15142056
- Part Description: 2009 Buick LaCrosse Actuator
Vehicle Fitment- 2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
$41.39 MSRP:$78.12You Save: $36.73 (48%)
Dorman® Hvac Air Door Actuator for 2009 Buick LaCrosse
PartNumber: 604-134Product Specifications- Notes: Mode; Packaging Type: Box
- Material: Plastic
- OE Part Number: 10325407, 10349563, 15844095, 22754989, 10308595
- Package Contents: Actuator
- Switch Activation Type: Rotary
- UPC: 019495304616
- Part Description: 2009 Buick LaCrosse Hvac Air Door Actuator
Vehicle Fitment- 2009 Buick LaCrosse | All Trims | All Engines
$17.77
Four Seasons® Hvac Mode Door Actuator for 2009 Buick LaCrosse
PartNumber: 73160Product Specifications- Door Linkage: Male
- Mounting Ear Qty.: 3
- Style: Floor Mode Actuator
- Terminal Pin Qty.: 2
- UPC: 096361073210
- Wire Quantity: Not Applicable
- Part Description: 2009 Buick LaCrosse Hvac Mode Door Actuator
Vehicle Fitment- 2009 Buick LaCrosse | All Trims | All Engines
$22.73
OEM (Genuine) 2009 Buick LaCrosse Actuator
PartNumber: 22754989
Product Specifications- Notes: Mode Valve
- Other Names: Actuator
- Item Dimensions: 4.2 x 4.1 x 2.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15844095, 10325407, 10349563
- Part Description: 2009 Buick LaCrosse Actuator
Vehicle Fitment- 2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
$45.47 MSRP:$85.81You Save: $40.34 (48%)
Dorman® Hvac Air Door Actuator for 2009 Buick LaCrosse
PartNumber: 604-108Product Specifications- Notes: Temperature; Packaging Type: Box;Air Inlet; Packaging Type: Box
- Material: Plastic
- OE Part Number: 10325404, 10356910, 15142056, 15249473, 15844096, 22754988, 52409974, 10308593
- Package Contents: Actuator
- Switch Activation Type: Rotary
- UPC: 019495227274
- Part Description: 2009 Buick LaCrosse Hvac Air Door Actuator
Vehicle Fitment- 2009 Buick LaCrosse | All Trims | All Engines
$16.58
Four Seasons® Hvac Heater Blend Door Actuator for 2009 Buick LaCrosse
PartNumber: 37530Product Specifications- Door Linkage: Female
- Mounting Ear Qty.: 3
- Style: Temperature Blend Actuator
- Terminal Pin Qty.: 2
- UPC: 096361375307
- Wire Quantity: Not Applicable
- Part Description: 2009 Buick LaCrosse Hvac Heater Blend Door Actuator
Vehicle Fitment- 2009 Buick LaCrosse | All Trims | All Engines
$20.67
FAQ for Hvac Heater Blend Door Actuator Repair
Q: What is the proper way to remove the mode valve?
A:
The proper way is to remove the I/P Trim pad, disengage the junction block, remove the booster push rod, disconnect any ground wires and remove the mode valve actuator.
By Omar
GM Specialist
30/12/2021Q: What is the proper way to install the mode valve actuator?
A:
The proper way is to align the mode actuator to the shafts, slide the actuator drive onto the shaft, install the right I/P insulator and calibrate the actuator.
By Omar
GM Specialist
27/12/2021Q: How do you install the air inlet valve actuator?
A:
You can install the actuator by positioning the recirculation actuator, aligning the slots, sliding the actuator onto the shaft, and calibrating the actuator.
By Omar
GM Specialist
21/12/2021Q: How do you remove the mode valve actuator?
A:
You can remove the actuator by removing the right I/P insulator, and the mode actuator and disconnecting the electrical connector.
By Omar
GM Specialist
21/12/2021Q: How do you remove the temperature valve actuator for the left side?
A:
You can remove the valve actuator by removing the left closeout panel, disconnecting the electrical connector from the left air temperature actuator, and removing the temperature actuator.
By Bob
GM Specialist
21/12/2021Q: How do you remove the temperature valve actuator for the right side?
A:
You can remove the valve actuator by removing the left closeout panel, disconnecting the electrical connector, and removing the temperature actuator.
By Omar
GM Specialist
21/12/2021Q: How many pins does the mode actuator have?
A:
The mode actuator has a total of 3 pins. Pins and Functions Pin A - Mode Door Control Pin B - Not Used Pin C - Mode Door Position Signal.
By Omar
GM Specialist
20/12/2021Q: What is the proper way to install the temperature valve actuator on the left side?
A:
The proper way is to slide the actuator onto the shaft, install the mounting screws to the temperature actuator, connect the electrical connector and calibrate the actuator.
By Bob
GM Specialist
20/12/2021Q: What is the proper way to install the temperature valve actuator on the right side?
A:
The proper way is to slide the actuator onto the shaft, install the mounting screws to the temperature actuator, and calibrate the actuator.
By Omar
GM Specialist
20/12/2021Q: What is the proper way to install the temperature valve?
A:
The proper way is to align the holes to the HVAC module case, connect the electrical connector, install the I/P compartment and calibrate the actuator.
By Bob
GM Specialist
20/12/2021See more FAQs (8)