Notes: without Aftermarket Filtration Improvement;In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/Reservoir
Aftermarket Filtration: Without
Attribute: With Reservoir
Hose Port: O-Ring
Housing Material: Cast Iron
Import or Domestic: Domestic
Mounting Hardware: Without
Power Steering Reservoir Cap: Without
Pulley: Without
Pulley Attachment Type: Press-on
Pump Inlet Attachment Type: Hose Barb
Pump Outlet Attachment Type: Threaded
Thread Size: M16 x 1.5
Part Description: 2009 Buick LaCrosse Remanufactured Power Steering Pump w/Reservoir
Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;Supplied w/o Reservoir
Hose Port: O-Ring
Housing Material: Cast Iron
Import or Domestic: Domestic
Mounting Hardware: Without
Power Steering Reservoir Cap: Without
Pulley: Without
Pulley Attachment Type: Press-on
Pump Inlet Attachment Type: Hose Barb
Pump Outlet Attachment Type: Threaded
Reservoir: Without
Thread Size: M16 x 1.5
Part Description: 2009 Buick LaCrosse Remanufactured Power Steering Pump w/o Reservoir
Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
Hose Port: O-Ring
Housing Material: Cast Iron
Import or Domestic: Domestic
Mounting Hardware: Without
Power Steering Reservoir Cap: Without
Pulley: Without
Pulley Attachment Type: Press-on
Pump Inlet Attachment Type: Hose Barb
Pump Outlet Attachment Type: Threaded
Reservoir: Without
Thread Size: M16 x 1.5
Part Description: 2009 Buick LaCrosse Remanufactured Power Steering Pump w/o Reservoir
More Info
Vehicle Fitment
2009 Buick LaCrosse | All Trims | 6 Cyl 3.8L
FAQ for Power Steering Pump Repair
Q: What does low or no pressure mean from the PS pump?
A:
Low or no pressure may be due to dirty or contaminated fluid, which would cause the relief valve to not work properly.
By Bob
GM Specialist
26/12/2021
FAQ for Other Repair Info
Q: What is the installation procedure for the power steering pump shaft seal?
A:
The procedure is to lubricate the drive shaft seal, install the shaft seal and install the power steering pump.
Q: What is the proper way to remove the power steering fluid reservoir?
A:
The proper way is to force the retaining clip out and remove the reservoir and the O-ring seal from the inside of the hydraulic pump.