< Back ×
2009 Cadillac DTS Air Bag Sensor
My Vehicle Change Vehicle
2009 Cadillac DTS
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2009 Cadillac DTS Side Sensor
PartNumber: 25758127$248.86 MSRP:$375.44You Save: $126.58 (34%)Product Specifications- Item Dimensions: 3.1 x 2.2 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac DTS Side Sensor
Vehicle Fitment- 2009 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 2.9 x 2.3 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac DTS Side Sensor
Vehicle Fitment- 2009 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Air Bag Sensor Repair
Q: What components should you replace after a collision?
A:
You should replace the following: the I/P module, the inflatable restraint SDM, and the seat belt pretensioner.
By Bob
GM Specialist
01/11/2022Q: What should you do before you replace the rood side rail module?
A:
You should disable the SIR system, and remove the windshield pillar garnish molding, the pillar trim, and the assist handles.
By Bob
GM Specialist
01/11/2022Q: What is the side object sensor bracket service procedure?
A:
Remove the side object sensor module and disconnect the electrical connectors.
By Bob
GM Specialist
01/11/2022Q: How many nuts does the side impact inflatable restraint have?
A:
The side impact inflatable restraint has 2 nuts in total.
By Bob
GM Specialist
01/11/2022Q: What is the vehicle direction alert alarm warning module installation procedure?
A:
Disconnect the electrical connector and use a small flat-bladed tool. Next, insert along the top edge in the recessed notches and push in both tabs to release the upper edge of the module. After that slide upward to disengage the lower tabs of the module from the bracket.
By Bob
GM Specialist
01/11/2022Q: What is the side object sensor procedure?
A:
Remove the bumper fascia and tighten the side object sensor module bolt to 9 Nm.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the inflatable restraint impact sensor have?
A:
The inflatable restraint impact sensor has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint front-end sensor service procedure?
A:
First, disable the supplemental inflatable restraint system and tighten the forward discriminating sensor bolts to 8 Nm.
By Bob
GM Specialist
01/11/2022Q: How many nuts does the inflatable restraint sensing and diagnostic module have?
A:
The inflatable restraint sensing and diagnostic module has 3 nuts in total.
By Bob
GM Specialist
28/10/2022See more FAQs (4)