< Back ×
2009 Cadillac DTS Transmission Mount
My Vehicle Change Vehicle
2009 Cadillac DTS
< Back to View All
Transmissions Components & Shifters
- Department
- Brands
- Prices
Product Specifications- Notes: AT;
- Bracket Included: YES
- Bracket Material: Steel
- Bushing Material: Rubber
- Color: Black
- Hardware Included: NO
- Installation Instructions Included: NO
- Installation Tools Included: NO
- Material: Steel and Rubber
- OE Part Number: 15294486
- Quantity: 1
- Type: OE Equivalent
- UPC: 081106031532
- Part Description: 2009 Cadillac DTS Transmission Mount
Vehicle Fitment- 2009 Cadillac DTS | All Trims | 8 Cyl 4.6L
Product Specifications- UPC: 656591031536
- Part Description: 2009 Cadillac DTS Automatic Transmission Mount
Vehicle Fitment- 2009 Cadillac DTS | All Trims | 8 Cyl 4.6L
Product Specifications- Notes: Dts
- Other Names: Transmission Mount
- Item Dimensions: 9.4 x 6.6 x 4.5 inches
- Item Weight: 3.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25886567, 15294486
- Part Description: 2009 Cadillac DTS Transmission Mount
Vehicle Fitment- 2009 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Transmission Mount Repair
Q: What are the torque specs for the mount?
A:
Tighten the bolts and nut to 50Nm (37lb-ft).
By Bob
GM Specialist
01/11/2022Q: What are the torque specs?
A:
The torque specs for the nuts and bolts are 50Nm (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: Where is the transmission mount brace located?
A:
The brace is located on the right side of the vehicle, specifically above the wheel.
By Bob
GM Specialist
01/11/2022Q: How do I access the bolts from under the mount?
A:
You will need to lift the engine from the frame to access the 3 bolts that secure the mount to the frame.
By Bob
GM Specialist
01/11/2022Q: Do I need to remove the heat shields?
A:
Yes the shield needs to be removed to access the brace.
By Bob
GM Specialist
01/11/2022Q: What are the torque specs for the heat shield nuts?
A:
The spec is as follows 50Nm (37lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do I access the brackets mounting bolts?
A:
You will need to lift the engine frame slightly to have clearance to reach the bolts.
By Bob
GM Specialist
01/11/2022Q: What are the torque specs for the bolts and nuts?
A:
The torque spec is 50 Nm (37lb-ft) for both.
By Bob
GM Specialist
01/11/2022See more FAQs (3)