< Back ×
My Vehicle Change Vehicle
2009 Cadillac SRX
< Back to View All
Hoods
- Department
- Prices
OEM (Genuine) 2009 Cadillac SRX Latch Asm-Hood Primary & Secondary
PartNumber: 20761109
Product Specifications- Other Names: Lock
- Item Dimensions: 6.8 x 6.6 x 6.8 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25850932
- Part Description: 2009 Cadillac SRX Latch Asm-Hood Primary & Secondary
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Hood Latch Repair
Q: What is the proper way to install the hood primary and secondary latch?
A:
You can connect the hood release cable to the hood latch, position the hood latch to the vehicle, install the bolts, connect the remote start electrical connector and adjust the hood primary latch.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood ajar indicator lamp switch?
A:
The procedure is to open the hood, disconnect the electrical connector, remove the fastener from the hood ajar switch and remove the hood ajar switch from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood front seal?
A:
The procedure is to remove the push-in retainers, work the seal off the hood from side to side, and remove the front hood seal from the hood.
By Bob
GM Specialist
01/11/2022Q: What must you replace if the hood striker is damaged?
A:
You must replace the hood.
By Bob
GM Specialist
01/11/2022Q: How do you adjust the hood latch?
A:
You can lower the hood onto the latch, raise the hood and tighten the fasteners to 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you install the hood hinge?
A:
You can install the hinge, the bolts, the hood, and the fender, close the hood, inspect for fit, adjust the hood and remove the tape from the panel and adjacent surfaces.
By Bob
GM Specialist
01/11/2022Q: How do you replace the hood's primary and secondary latch?
A:
You can remove the bolts, disconnect the hood release cable, disconnect the remote start the electrical connector and remove the hood latch.
By Bob
GM Specialist
01/11/2022Q: What should you ensure before you tighten the hood latch mounting fasteners?
A:
You should ensure that you have the proper alignment of the hood to the body.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the fasteners securing the hood striker to the hood?
A:
You can tighten the fasteners to 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you install the hood ajar indicator lamp switch?
A:
You can install the hood ajar switch, install the fastener to secure the hood ajar switch, connect the electrical connector to the hood ajar switch and close the hood.
By Bob
GM Specialist
01/11/2022See more FAQs (9)