< Back ×
My Vehicle Change Vehicle
2009 Cadillac SRX
< Back to View All
Power Sunroof & Convertible Top
- Department
- Prices
OEM (Genuine) 2009 Cadillac SRX Actuator
PartNumber: 15932104
Product Specifications- Notes: Frame Hardware, Sunroof Glass Components, Sunroof Glass
- Other Names: Actuator, Motor
- Item Dimensions: 9.4 x 3.1 x 11.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25747549
- Part Description: 2009 Cadillac SRX Actuator
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$429.85 MSRP:$811.06You Save: $381.21 (48%)
OEM (Genuine) 2009 Cadillac SRX Motor, Sun Roof Rear Sunshade (W/Control Module)
PartNumber: 15140328
Product Specifications- Notes: SRX; Rear
- Other Names: Motor, Window Shade Motor
- Item Dimensions: 9.4 x 3.1 x 11.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Motor, Sun Roof Rear Sunshade (W/Control Module)
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2009 Cadillac SRX Motor, Sun Roof Front Sunshade (W/Control Module)
PartNumber: 25747548
Product Specifications- Notes: Frame Hardware, Sunroof Glass Components, Sunshade
- Other Names: Motor, Window Shade Motor
- Item Dimensions: 9.3 x 6.1 x 5.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Motor, Sun Roof Front Sunshade (W/Control Module)
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Sunroof Motor Repair
Q: What is the proper way to install the sunroof cam assembly?
A:
You can position the lift arm pin in the cam assembly slot, install the cam assembly to the sunroof frame with the screws, move the lift arm to the bottom of the slot in the cam assembly, install the rear sunroof window and install the headliner assembly.
By Bob
GM Specialist
02/11/2022Q: How do you replace the sunroof cam assembly?
A:
You can lower the headliner, remove the rear sunroof window, move the rear window to the full vent position, release the lift arm from the cam assembly and remove the cam screws and cam assembly from the sunroof frame.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the Sunroof Motor/Actuator Block Assembly (Front Window)?
A:
The procedure is to open the front sunshade to the fully open position, remove the center window, the front sunroof window, the front sunroof motor/actuator, and the front sunshade assembly, and remove either the front left or front right sunroof front window track, cut the tie straps securing the electrical harness to the return tubes, release the return tube, hold onto the motor block, remove the drive and return tubes and remove the motor/actuator block assembly.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Sunroof Motor/Actuator Block Assembly (Rear Vent Window)?
A:
The procedure is to open the rear sunshade to the fully open position, remove the center window, the rear sunroof vent window, the rear sunroof vent window motor/actuator, and the rear sunshade assembly, remove either the rear left or rear right sunroof rear window track, cut the tie straps securing the electrical harness to the drive and return tubes, release the drive and return tubes, hold onto the motor block, pry the return tube from the motor block, remove the drive and return tubes and remove the vent window motor/actuator block.
By Bob
GM Specialist
01/11/2022Q: How do you replace the sunroof motor/actuator?
A:
You can remove the center sunroof window, disconnect the motor/actuator electrical harness, remove the motor/actuator to motor/actuator block screws, pull the sunroof motor/actuator up, and remove the applicable motor/actuator from the motor/actuator block.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Sunroof Motor/Actuator Block Assembly (Rear Sunshade)?
A:
The procedure is to open the rear sunshade to the fully open position, remove the center window, the rear sunroof vent window, the rear sunroof sunshade motor/actuator, and the rear sunshade assembly, remove either the rear left or rear right sunroof rear window track, cut the tie straps securing the electrical harness to the drive and return tubes, release the drive and return tubes, hold onto the motor block, pry the return tube from the motor block, remove the drive and return tubes and remove the sunshade motor/actuator block.
By Bob
GM Specialist
01/11/2022Q: How do you install the Sunroof Motor/Actuator Block Assembly (Front Sunshade)?
A:
You can position the drive and return tubes to the motor block, secure the return tube to the motor block, position the front sunroof/sunshade motor/actuator block assembly to the motor compartment, install 2 motor/actuator screws, install either the front left or front right sunroof front window track, install the front sunshade assembly, remove the motor/actuator screws, install the front sunshade motor/actuator, secure the electrical harness to the drive and return tubes, install the front sunroof window, install the center window, close the front sunshade and perform the front window/sunshade initialization process.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the sunroof motor/actuator?
A:
You can slide the front window cable and guide assembly completely forward, connect the motor/actuator electrical harness, install the sunroof front window motor/actuator, rock the motor/actuator, install the 3 motor/actuator screws, install the front sunroof window, install the center sunroof window and perform the window initialization procedure.
By Bob
GM Specialist
01/11/2022Q: How do you install the Sunroof Motor/Actuator Block Assembly (Front Window)?
A:
You can position the drive and return tubes to the motor block, secure the return tube to the motor block, position the motor/actuator block assembly to the motor compartment, install 2 motor/actuator screws, install either the front left or front right sunroof front window track, install the front sunshade assembly, remove the motor/actuator screws, install the front window motor/actuator, secure the electrical harness to the drive and return tubes, install the front sunroof window, install the center window, close the front sunshade and perform the front window/sunshade initialization process.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Sunroof Motor/Actuator Block Assembly (Front Sunshade)?
A:
The procedure is to open the front sunshade to the fully open position, remove the center window, the front sunroof window, the front sunroof sunshade motor/actuator, and the front sunshade assembly, remove either the front left or front right sunroof front window track, cut the tie straps securing the electrical harness to the return tubes, release the return tube, hold onto the motor block, remove the drive and return tubes and remove the front sunshade motor/actuator block assembly.
By Bob
GM Specialist
01/11/2022See more FAQs (7)