< Back ×
My Vehicle Change Vehicle
2009 Cadillac SRX
< Back to View All
Wipers & Washers
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Wiper Motor for 2009 Cadillac SRX
PartNumber: 40-1065Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Grommet
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 2.05 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2009 Cadillac SRX Remanufactured Wiper Motor
Vehicle Fitment- 2009 Cadillac SRX | All Trims | All Engines
$117.34
Cardone Reman® Remanufactured Wiper Motor for 2009 Cadillac SRX
PartNumber: 40-1080Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 2.5 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2009 Cadillac SRX Remanufactured Wiper Motor
Vehicle Fitment- 2009 Cadillac SRX | All Trims | All Engines
$64.07
OEM (Genuine) 2009 Cadillac SRX Front Motor
PartNumber: 19368526
Product Specifications- Notes: Srx
- Other Names: Front Motor, Wiper Motor
- Item Dimensions: 9.5 x 8.2 x 11.3 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19121120, 19177837
- Part Description: 2009 Cadillac SRX Front Motor
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2009 Cadillac SRX Motor, Rear Window Wiper
PartNumber: 25805170
Product Specifications- Notes: Srx
- Other Names: Rear Motor, Wiper Motor
- Item Dimensions: 8.3 x 8.4 x 13.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25762704, 25772721
- Part Description: 2009 Cadillac SRX Motor, Rear Window Wiper
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Windshield Wiper Motors Repair
Q: How do you install the Wiper Motor Module Grommet?
A:
You can install the round, oval, and pin wiper motor module grommets, place the wiper motor module into the vehicle, connect the wiper motor module electrical connector, align the wiper module locator hole to the pin, align the locator hole to the hole and install the outer fastener, the center fastener, the air inlet grille, the wiper arm assemblies, and the wiper motor fuse.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Wiper Motor Module Grommet?
A:
The procedure is to remove the wiper motor fuse, the wiper arm assemblies, the air inlet grille, and the wiper motor module mounting bolts, disconnect the wiper motor electrical connector, remove the wiper motor module from the vehicle and remove the round, oval and pin wiper motor module grommets.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the windshield wiper motor?
A:
The procedure is to remove the wiper motor module assembly, remove the drive links from the wiper motor crank arm to the wiper motor, remove the 3 screws retaining the wiper motor to the wiper motor module and remove the wiper motor.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the windshield wiper system module?
A:
The procedure is to remove the wiper motor mini 10 A and 30 A fuses, the wiper arm assemblies, the air inlet grille, and the wiper motor module mounting bolts, disconnect the wiper motor electrical connector and remove the wiper motor module.
By Bob
GM Specialist
01/11/2022Q: How do you install the windshield wiper system module?
A:
You can place the wiper motor module into the vehicle, connect the wiper motor module electrical connector, align the wiper module locator hole to the pin, align the locator hole to the hole in the pillar flange, install the outer bolt, install the center bolt, install the air inlet grille, install the wiper arm assemblies and install the wiper motor fuses to the underhood fuse block.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the front windshield wiper motor cover?
A:
You can position the wiper motor cover to the wiper motor housing, install the wiper motor cover fasteners, tighten the fasteners in an °X° pattern and install the wiper motor module.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the liftgate wiper motor?
A:
The procedure is to remove the rear wiper arm and the interior liftgate trim panel, disconnect the fluid line from the wiper motor, disconnect the wire connector from the wiper motor, remove the wiper motor attaching bolts and pull the wiper motor through the shaft grommet.
By Bob
GM Specialist
01/11/2022Q: How do you install the liftgate wiper motor?
A:
You can lubricate the wiper motor shaft with windshield washer fluid, apply thread lock to the wiper motor attaching bolts, install the wiper motor attaching bolts, connect the wire connector to the wiper motor, connect the fluid line to the wiper motor, install the interior liftgate trim panel and install the rear wiper arm.
By Bob
GM Specialist
01/11/2022Q: How do you install the windshield wiper motor?
A:
You can install the wiper motor onto the wiper motor module assembly, install the drive links onto the wiper motor crank arm, install the wiper motor module assembly, operate the wipers, and check for proper operation.
By Bob
GM Specialist
01/11/2022Q: How do you replace the front windshield wiper motor cover?
A:
You can remove the wiper motor module, remove the fasteners from the wiper motor cover and remove the wiper motor cover from the wiper motor housing.
By Bob
GM Specialist
01/11/2022See more FAQs (5)