< Back ×
2009 Cadillac XLR Air Bag Sensor
My Vehicle Change Vehicle
2009 Cadillac XLR
< Back to View All
Air Bag
- Department
- Prices
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 4.2 x 2.3 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10345690
- Part Description: 2009 Cadillac XLR Side Sensor
Vehicle Fitment- 2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 3.1 x 3.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10345689
- Part Description: 2009 Cadillac XLR Front Sensor
Vehicle Fitment- 2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Air Bag Sensor Repair
Q: What is the proper way to install the driver/passenger seat restraint module?
A:
The proper way is to install the module wiring harness, the wiring harness retaining clips, and the seat back cover.
By Bob
GM Specialist
01/11/2022Q: How do you remove the driver/passenger seat restraint module?
A:
You can disable the SIR system, and remove the front seat, the seat back cover, and the side impact module.
By Bob
GM Specialist
01/11/2022Q: What components should you inspect after an accident?
A:
You should inspect the I/P module, the steering wheel module, and the front-end sensors.
By Bob
GM Specialist
01/11/2022Q: How do you install the side impact sensor?
A:
You can install the sensor, and the door trim panel, and enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the side impact sensor?
A:
The procedure is to disable the SIR system and remove the door trim panel, and the sensor.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to remove the inflatable front-end sensor?
A:
The proper way is to disable the SIR system and remove the bolts, and the sensor.
By Bob
GM Specialist
01/11/2022Q: How do you install the inflatable front-end sensor?
A:
You can install the sensor, and the retaining bolts, and enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for inflatable restraint sensing?
A:
The procedure is to remove the trim plate, the CPA, and the SDM fasteners.
By Bob
GM Specialist
28/10/2022Q: What should you do when removing a SIR component?
A:
You should disconnect the battery cable from the vehicle.
By Bob
GM Specialist
28/10/2022Q: How do you install the inflatable restraint sensing?
A:
You can install the SDM, the CPA, and the trim plate.
By Bob
GM Specialist
28/10/2022See more FAQs (5)