< Back ×
2009 Cadillac XLR Body Control Module
My Vehicle Change Vehicle
2009 Cadillac XLR
< Back to View All
Light Relays, Switches & Control Modules
- Department
- Prices
Product Specifications- Notes: Relays & Modules, Body, Body Control
- Other Names: Body Control Module, Module
- Item Dimensions: 9.2 x 4.2 x 10.5 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25832924, 25879086, 20759656
- Part Description: 2009 Cadillac XLR Body Control Module Assembly
Vehicle Fitment- 2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2009 Cadillac XLR Transmitter Pkg-Remote Control Door Lock & Theft Deterrent
PartNumber: 25947486Product Specifications- Notes: Xlr; W/O Keyless Entry
- Other Names: Control Module
- Item Dimensions: 8.3 x 6.1 x 2.1 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15819143, 10353788
- Part Description: 2009 Cadillac XLR Transmitter Pkg-Remote Control Door Lock & Theft Deterrent
Vehicle Fitment- 2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2009 Cadillac XLR Transmitter Pkg-Remote Control Door Lock & Theft Deterrent
PartNumber: 25947488Product Specifications- Notes: Xlr; W/Keyless Entry
- Other Names: Control Module, Receiver
- Item Dimensions: 8.3 x 5.2 x 2.0 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15819145, 10353790
- Part Description: 2009 Cadillac XLR Transmitter Pkg-Remote Control Door Lock & Theft Deterrent
Vehicle Fitment- 2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
Product Specifications- Notes: Reverse Sensing System
- Other Names: Module
- Item Dimensions: 5.9 x 5.4 x 3.6 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10317519
- Part Description: 2009 Cadillac XLR Rear Object Alarm Module Assembly
Vehicle Fitment- 2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Body Control Module Repair
Q: What is the body control module installation procedure?
A:
Connect the harness connectors to the BCM and position the BCM to the multiuse bracket. Next, install the retaining screws to the BCM and tighten them to 2 Nm. Install the kick-up panel and replace the BCM.
By Bob
GM Specialist
01/11/2022Q: What should you remove before you replace the communication interface module?
A:
You should remove the communication interface module bracket from the vehicle.
By Bob
GM Specialist
29/10/2022Q: What is the communication interface module bracket service procedure?
A:
Remove the instrument panel compartment and tighten the communication interface module nut to 3 Nm. Tighten the communication interface module bolt screws to 3 Nm.
By Bob
GM Specialist
29/10/2022