< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Avalanche
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Avalanche Cylinder Asm-Brake Master
PartNumber: 20845345
Product Specifications- Notes: Avalanche, Escalade Ext
- Other Names: Master Cylinder
- Item Dimensions: 9.8 x 7.5 x 9.5 inches
- Item Weight: 4.30 Pounds
- Replaced by: 19432757
- Part Description: 2009 Chevrolet Avalanche Cylinder Asm-Brake Master
Vehicle Fitment- 2009 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$125.90 MSRP:$249.82You Save: $123.92 (50%)
Centric® Premium Brake Master Cylinder for 2009 Chevrolet Avalanche
PartNumber: 130.66066Product Specifications- UPC: 805890527862
- Part Description: 2009 Chevrolet Avalanche Premium Brake Master Cylinder
Vehicle Fitment- 2009 Chevrolet Avalanche | All Trims | All Engines
$84.32OEM (Genuine) 2009 Chevrolet Avalanche CYLINDER ASM, BRK MAS
PartNumber: 19420798
Product Specifications- Other Names: Master Cylinder
- Fitment Type: Direct Replacement
- Replaced by: 19432757
- Part Description: 2009 Chevrolet Avalanche CYLINDER ASM, BRK MAS
Vehicle Fitment- 2009 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$125.90 MSRP:$249.82You Save: $123.92 (50%)
OEM (Genuine) 2009 Chevrolet Avalanche Master Cylinder
PartNumber: 19417185
Product Specifications- Notes: Avalanche, Escalade Ext
- Other Names: Master Cylinder
- Replaced by: 19432757
- Part Description: 2009 Chevrolet Avalanche Master Cylinder
Vehicle Fitment- 2009 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$132.39 MSRP:$249.82You Save: $117.43 (48%)
Cardone Reman® Remanufactured Master Cylinder for 2009 Chevrolet Avalanche
PartNumber: 10-4198Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter: 1.250" (31.75 mm)
- Casting Material: Aluminum
- Master Cylinder Color: Gray
- Master Cylinder Material: Aluminum
- Master Cylinder Primary Port Size: M14 x 1.5
- Master Cylinder Secondary Port Size: M14 x 1.5
- Mounting Hardware Included: No
- Mounting Hole Count: 2
- Port Quantity: 2
- Reservoir: Without
- Part Description: 2009 Chevrolet Avalanche Remanufactured Master Cylinder
Vehicle Fitment- 2009 Chevrolet Avalanche | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: What is the brake master cylinder adapter installation procedure?
A:
First, install the master cylinder adapter gasket, install the brake master cylinder adapter, install the 4 brake pedal bracket nuts and tighten to 25 Nm. Connect the brake pedal pushrod while installing the stop lamp switch and install the brake pushrod retainer. Next, install the brake pushrod retainer bolt and tighten it to 10 Nm. Install the master cylinder seal and position the master cylinder to the master cylinder adapter. Finally, install 2 master cylinder nuts and tighten to 33 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the master cylinder reservoir installation procedure?
A:
First, lubricate the master cylinder reservoir seals and install the master cylinder reservoir seals to the master cylinder. Install the master cylinder reservoir bolts and tighten them to 8 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the master cylinder reservoir service procedure?
A:
Discard the brake fluid into a container and carefully speed the 2 locking tabs. Next, lift the master cylinder reservoir upward.
By Bob
GM Specialist
01/11/2022Q: What is the master cylinder service procedure?
A:
Turn the engine off and apply the brake pedal several times until the brake pedal becomes firm to deplete the vacuum brake booster vacuum reserve. Next, discard the brake fluid into a container. Make sure to tighten the brake pipe fitting to 32 Nm and the brake master cylinder nuts to 35 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the master cylinder bench bleeding service procedure?
A:
Make sure to secure the mounting flange of the brake master cylinder and remove the master cylinder reservoir cap/diaphragm. Next, install suitable fittings to the master cylinder ports and install transparent hoses to the fittings installed to the master cylinder ports.
By Bob
GM Specialist
01/11/2022Q: What is the brake master cylinder reservoir hose installation procedure?
A:
Install the supply and return hoses to the vehicle. Next, connect the BPMV return hose quick connect and make sure the return hose quick connect is fully engaged. After that install the ABS. module splash shield and tighten to 20 Nm. Install the ABS module splash shield retainers and fill the brake master cylinder reservoir.
By Bob
GM Specialist
01/11/2022See more FAQs (1)