< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Avalanche
OEM (Genuine) 2009 Chevrolet Avalanche Rear Cable
PartNumber: 25952160
Product Specifications- Notes: Avalanche, Escalade Ext; Right; All
- Other Names: Rear Cable
- Item Dimensions: 7.2 x 15.5 x 15.8 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Avalanche Rear Cable
Vehicle Fitment- 2009 Chevrolet Avalanche | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$62.66 MSRP:$118.24You Save: $55.58 (48%)OEM (Genuine) 2009 Chevrolet Avalanche Rear Cable
PartNumber: 20756278
Product Specifications- Notes: Avalanche, Escalade Ext; Left; All
- Other Names: Rear Cable
- Item Dimensions: 14.5 x 14.5 x 4.4 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Avalanche Rear Cable
Vehicle Fitment- 2009 Chevrolet Avalanche | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$80.26 MSRP:$151.45You Save: $71.19 (48%)OEM (Genuine) 2009 Chevrolet Avalanche Intermediate Cable
PartNumber: 20848628
Product Specifications- Notes: Avalanche, Escalade Ext
- Other Names: Intermediate Cable
- Item Dimensions: 4.0 x 11.2 x 11.6 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25838764
- Part Description: 2009 Chevrolet Avalanche Intermediate Cable
Vehicle Fitment- 2009 Chevrolet Avalanche | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Parking Brake Cable Repair
Q: What is the parking brake rear cable installation procedure?
A:
First, install the cable taking care to correctly route the cable through the guides and the body mounts. Next, install the cable backing plate by pressing the cable into place until the tabs lock. Install the cable to the actuator lever, place the park brake cable to the rear axle bracket and install the bolt/nut. Make sure to tighten the bolt/nut to 22 Nm and install the cable to the mounting bracket.
By Bob
GM Specialist
02/11/2022Q: What is the parking brake cable adjuster disabling procedure?
A:
Make sure to hold the pedal in the FULL upward position and pull rearward on the front park brake cable until the pedal drum reaches its full reset position. Next, insert a thin tool on an upward angle through the hole in the front of the pedal assembly. Release the cable and remove the component that requires service.
By Bob
GM Specialist
02/11/2022Q: What is the parking brake cable adjuster enabling procedure?
A:
First, hold the park brake pedal in the full upward position and pull rearward on the front park brake cable. Remove the tool and slowly release the park brake cable until it returns to its original position. Next, release the park brake pedal and release the park brake pedal 3 times.
By Bob
GM Specialist
02/11/2022Q: What is the parking brake cable guide installation procedure?
A:
First, install the park brake cable guide to the park brake cable and install the park brake cable guide. Next, install the park brake cable guide bolt to the frame and tighten it to 12 Nm.
By Bob
GM Specialist
02/11/2022