FAQ for Seat Cushion Pad Repair
Q: What is the front seat cushion inner trim panel service procedure?
A:
Remove the front seat, disengage the bezel and squeeze the tabs in the rear of the cover together to disengage the outer trim cover. Next, pull outward to release the retainers from the seat assembly.
By BobGM Specialist
01/11/2022 Q: What is the rear seat back cushion latch cover service procedure?
A:
Unlatch the rear seat cushion and fold forward. Tighten the rear seat latch trim cover screws to 2 Nm.
By BobGM Specialist
01/11/2022 Q: What is the driver/passenger seat back cushion frame service procedure?
A:
First, remove the front/rear seat back cushion cover and pad. Next, Tighten the front seat back frame bolts to 50 Nm.
By BobGM Specialist
01/11/2022 Q: What is the front seat cushion outer trim panel service procedure?
A:
First, squeeze the tabs in the rear of the cover to disengage the outer trim cover and pull outward to release the retainers from the seat assembly. Next disconnect the electrical connectors.
By BobGM Specialist
01/11/2022 Q: What is the driver/passenger seat back cushion cover and pad replacement service procedure?
A:
Depress the button on the inboard head restraint guide and insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide.
By BobGM Specialist
01/11/2022 Q: How many bolts does the rear seat back cushion trim panel have?
A:
The rear seat back contains a total of 8 bolts that need to be tightened to 3 Nm.
By BobGM Specialist
01/11/2022 See more FAQs (1)