< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Aveo
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Aveo Pulley
PartNumber: 96940406
Product Specifications- Other Names: Pulley
- Item Dimensions: 8.2 x 7.2 x 3.1 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Aveo Pulley
Vehicle Fitment- 2009 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
$138.37 MSRP:$251.61You Save: $113.24 (46%)
OEM (Genuine) 2009 Chevrolet Aveo Clutch Coil
PartNumber: 96405814
Product Specifications- Other Names: Clutch Coil, Coil
- Item Dimensions: 6.1 x 4.2 x 4.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Aveo Clutch Coil
Vehicle Fitment- 2009 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$77.51 MSRP:$146.25You Save: $68.74 (48%)
OEM (Genuine) 2009 Chevrolet Aveo Clutch Plate & Hub Assembly
PartNumber: 96940405
Product Specifications- Item Dimensions: 8.3 x 7.1 x 4.2 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Aveo Clutch Plate & Hub Assembly
Vehicle Fitment- 2009 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
OEM (Genuine) 2009 Chevrolet Aveo Clutch, A/C
PartNumber: 96408443
Product Specifications- Other Names: Clutch
- Item Dimensions: 8.1 x 7.7 x 3.3 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Aveo Clutch, A/C
Vehicle Fitment- 2009 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for A/C Clutch Repair
Q: What special tools will I need?
A:
Puller Crossbar, Forcing Screw, Clutch Coil Installer Adapter, and Compressor Holding Fixture.
By Bob
GM Specialist
13/12/2021Q: What special tools will be needed in the removal?
A:
Puller crossbar, forcing screw, a puller pilot, and clutch coil puller legs.
By Omar
GM Specialist
12/12/2021Q: How can I prevent coil movement?
A:
When reinstalling the coil flange protrusion be sure to match the front head hole to prevent coil movement.
By Omar
GM Specialist
03/11/2021Q: How do you remove the SP10 compressor clutch plate and hub?
A:
You can remove the clutch plate and hub by removing the compressor and the shaft bolts.
By Bob
GM Specialist
01/11/2021Q: How do I remove the clutch coil?
A:
Remove the clutch and drive assembly, the pulley and bearing assembly, the coil retainer using the snap ring pliers, and the coil retainer using the snap ring pliers.
By Bob
GM Specialist
01/11/2021Q: How do you install the SP10 compressor clutch plate/hub for this vehicle?
A:
You can install the compressor clutch plate by matching the shaft serration with drive hub serration, inserting the clutch drive, and placing the washer.
By Omar
GM Specialist
01/11/2021Q: How do you install the SP10 compressor clutch rotor and bearing?
A:
You can install the rotor and bearing by locating the rotor pulley, inserting the pulley, and installing the clutch and drive.
By Bob
GM Specialist
01/11/2021Q: What is the installation procedure for the compressor clutch plate/hub?
A:
The procedure is to install the clutch hub key, align the hub key, and install the nut and compressor.
By Omar
GM Specialist
28/10/2021Q: What is the proper way to disassemble the V5 compressor clutch plate and hub?
A:
The proper way is to remove the compressor, shaft nut, and clutch hub key.
By Bob
GM Specialist
26/10/2021Q: What is the proper way to remove the V5 compressor clutch rotor and bearing?
A:
The proper way is to disconnect the battery cable, remove the compressor and the clutch drive plate, and drive the bearing out of the rotor hub.
By Bob
GM Specialist
26/10/2021See more FAQs (6)