< Back ×
2009 Chevrolet Aveo Heater Hose
My Vehicle Change Vehicle
2009 Chevrolet Aveo
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Aveo Heater Hose
PartNumber: 95214145$14.33 MSRP:$27.02You Save: $12.69 (47%)Product Specifications- Notes: 2009-11, Outlet
- Other Names: Heater Hose
- Item Dimensions: 6.3 x 22.4 x 1.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96887762, 96930908
- Part Description: 2009 Chevrolet Aveo Heater Hose
Vehicle Fitment- 2009 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
Product Specifications- Notes: Cut to Length, 34";Cut to Length, 15";Cut to Length, 12"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 10 mm
- End 2 Inside Diameter: .375 in
- Material: EPDM
- OE Part Number: 8899
- UPC: 072053081183
- Weight Per Length: 8.25 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 2009 Chevrolet Aveo Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2009 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
Product Specifications- Notes: Cut to Fit
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 1 Outside Diameter: 15/16
- End 2 Inside Diameter: 3/4
- End 2 Outside Diameter: 1 1/16
- Hose Type: Dual I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 17
- UPC: 036687695772
- Part Description: 2009 Chevrolet Aveo Small Id Hvac Heater Hose
Vehicle Fitment- 2009 Chevrolet Aveo | All Trims | All Engines
OEM (Genuine) 2009 Chevrolet Aveo Heater Hose
PartNumber: 95214144$17.86 MSRP:$33.68You Save: $15.82 (47%)Product Specifications- Notes: 2009-11, Inlet
- Other Names: Heater Hose
- Item Dimensions: 6.1 x 22.7 x 1.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96940427
- Part Description: 2009 Chevrolet Aveo Heater Hose
Vehicle Fitment- 2009 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
Product Specifications- Notes: Cut to fit
- Branch Quantity: 0
- Centerline Length (in): 6.5
- Centerline Length (mm): 165
- End 1 Inside Diameter: 0.28 in
- End 2 Inside Diameter: 0.28 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 1945
- UPC: 072053178241
- Part Description: 2009 Chevrolet Aveo Hvac Heater Molded Hose
Vehicle Fitment- 2009 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 1/4
- End 2 Inside Diameter: 1/4
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 14 1/4
- UPC: 038244597482
- Part Description: 2009 Chevrolet Aveo Small Id Hvac Heater Hose
Vehicle Fitment- 2009 Chevrolet Aveo | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 20.4"
- Inside Diameter 1 (in): 0.75"
- Number of Branches: 0
- UPC: 072053178593
- Part Description: 2009 Chevrolet Aveo Hvac Heater Molded Hose
Vehicle Fitment- 2009 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 3/4
- End 2 Inside Diameter: 3/4
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 18
- UPC: 038244599219
- Part Description: 2009 Chevrolet Aveo Left Small Id Hvac Heater Hose
Vehicle Fitment- 2009 Chevrolet Aveo | All Trims | All Engines
FAQ for Heater Hose Repair
Q: What is the heater hoses (hatchback) removal procedure?
A:
First, drain the cooling system, and gently twist the hose from the left to the right. Next, remove the end of the hose from the tube, and compress the heater hose spring clamp on the inlet coolant line. After that, remove the hose from the vehicle, and squeeze the heater hose spring clamp at the connection below.
By Omar
GM Specialist
28/10/2021Q: What is the heater hoses (notchback) installation procedure?
A:
First install the left heater hose to the coolant inlet line, after that install the right heater hose. Next compress and slide the spring clamps into position on the heater hoses. Finally check the hoses for leaks.
By Bob
GM Specialist
28/10/2021Q: What is the heater hose installation procedure? (Notchback)
A:
First install the left heater hose to the coolant inlet line fitting, later install the right heater hose to the fitting below the intake manifold. Install and seat the end of each heater hose. Finally, fill the cooling system.
By Bob
GM Specialist
28/10/2021Q: What is the heater hose removal procedure? (Notchback)
A:
Start by twisting the hose from left to right, remove the end of the hose from the tube, and push the heater hose spring clamp on the inlet coolant line. Lastly, remove the hose from the vehicle.
By Omar
GM Specialist
28/10/2021Q: What is the heater hose (hatchback) installation procedure?
A:
First, install the left heater hose to the coolant inlet line fitting and the right heater hose to the fitting below the intake manifold. Next compress and slide the spring clamps into position on the heater hoses, and fill the cooling system.
By Bob
GM Specialist
28/10/2021Q: What is the heater hoses (notchback) removal procedure?
A:
First, drain the cooling system, and twist the hose to loosen the bond between the hose and the tube. Next, remove the end of the hose from the tube, and compress the heater hose spring clamp on the inlet coolant line. Finally, compress the heater hose spring clamp, and remove the hose from the vehicle.
By Omar
GM Specialist
28/10/2021Q: What is the heater hose (hatchback) removal procedure?
A:
First twist the hose from left to right, remove the end of the hose from the tube and compress the heater hose spring clamp. Next, remove the hose from the vehicle, and compress the heater hose spring clamp at the connection below the intake manifold.
By Omar
GM Specialist
28/10/2021Q: What is the heater hoses (hatchback) installation procedure?
A:
First, install the left heater hose to the coolant inlet line fitting, and install the right heater hose to the fitting below the intake manifold. Next, install and seat the other end of each heater hose, and squeeze the spring clamps into position on the heater hoses.
By Bob
GM Specialist
28/10/2021See more FAQs (3)