< Back ×
2009 Chevrolet Colorado Air Temperature Sensor
My Vehicle Change Vehicle
2009 Chevrolet Colorado
< Back to View All
A/C & Heating
- Department
- Prices
$5.51 MSRP:$10.38You Save: $4.87 (47%)Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 2.1 x 1.8 x 1.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10396844
- Part Description: 2009 Chevrolet Colorado AC Temperature Sensor
Vehicle Fitment- 2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$80.92 MSRP:$152.70You Save: $71.78 (48%)Product Specifications- Notes: 2.8 & 2.9 Liter, 2008-12; 3.5 & 3.7 Liter, 2008-12; 5.3 Liter; Canyon, Colorado
- Item Dimensions: 4.4 x 4.1 x 1.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12576410
- Part Description: 2009 Chevrolet Colorado Sensor
Vehicle Fitment- 2009 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Air Temperature Sensor Repair
Q: What is the ambient air temperature sensor installation procedure?
A:
First, place the sensor on the radiator support bracket, install the sensor ensuring the retaining tabs and connect the electrical connector to the ambient air temperature sensor. Next, install the air inlet grille.
By Bob
GM Specialist
01/11/2022Q: What is the ambient air temperature sensor removal procedure?
A:
Remove the air inlet grille and disconnect the electrical connector to the ambient air temperature sensor. Next release the tabs retaining the sensor to the radiator support bracket and remove the sensor from the radiator support bracket.
By Bob
GM Specialist
01/11/2022Q: What is the mass airflow sensor with the intake air temperature sensor removal procedure?
A:
Disconnect the engine wiring harness electrical connector from the MAF/IAT sensor and the screws. Next, remove the air cleaner upper housing.
By Bob
GM Specialist
01/11/2022Q: What is the mass airflow sensor with the intake air temperature sensor installation procedure?
A:
First install the MA/IAT sensor to the air cleaner upper housing, and the sensor screws and tighten the screws to 1.5 Nm. Next, connect the engine wiring harness electrical connector to the MA/IAT sensor.
By Bob
GM Specialist
01/11/2022