< Back ×
2009 Chevrolet Colorado Differential Pinion Bearing
My Vehicle Change Vehicle
2009 Chevrolet Colorado
< Back to View All
Driveline, Axles & 4WD
- Department
- Location
- Brands
- Prices
$17.07Product Specifications- Notes: with AAM Axle; with 8in Ring Gear
- UPC: 724956020683
- Part Description: 2009 Chevrolet Colorado Front Outer Differential Pinion Bearing
Vehicle Fitment- 2009 Chevrolet Colorado | All Trims | All Engines
$25.51Product Specifications- Notes: w/AAM Axle; w/Independent Carrier Assy; w/7.6in Ring Gear
- Part Description: 2009 Chevrolet Colorado Rear Inner Differential Pinion Bearing
Vehicle Fitment- 2009 Chevrolet Colorado | All Trims | All Engines
$48.53 MSRP:$96.32You Save: $47.79 (50%)Product Specifications- Notes: Canyon, Colorado
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.4 x 3.4 x 1.2 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 9442126, 09442126
- Part Description: 2009 Chevrolet Colorado Rear Wheel Bearing
Vehicle Fitment- 2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, Trail Boss, WT, Z71, Z71 LS, Z85, Z85 LS, ZR2 | 4 Cyl 2.7 L GAS, 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$37.48 MSRP:$68.16You Save: $30.68 (46%)Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 3.0 x 3.0 x 1.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Colorado Outer Pinion Bearing
Vehicle Fitment- 2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$68.05 MSRP:$128.42You Save: $60.37 (48%)Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 3.6 x 3.6 x 1.6 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Colorado Front Pinion Bearing
Vehicle Fitment- 2009 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
- $74.26 MSRP:
$140.14You Save: $65.88 (48%)Product Specifications- Notes: Canyon, Colorado
- Other Names: Side Bearings
- Item Dimensions: 4.3 x 4.1 x 2.1 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 09418390, 9418390
- Part Description: 2009 Chevrolet Colorado Side Bearings
Vehicle Fitment- 2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
- $73.89 MSRP:
$139.44You Save: $65.55 (48%)Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 4.1 x 4.2 x 2.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26053758, 9418357, 15286375, 20997052, 22786621, 9418356, 09418356, 12479221, 09418357
- Part Description: 2009 Chevrolet Colorado Outer Pinion Bearing
Vehicle Fitment- 2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Differential Pinion Bearing Repair
Q: What is the drive pinion bearings assembly procedure?
A:
Use the DT 49032 installer and determine the selective spacer thickness for the pinion. Next, install the selective pinion spacer on the pinion gear, lubricate the pinion bearings with axle lubricant and install the differential drive pinion gear outer bearing into the axle housing. After that install the differential drive pinion dear into the axle housing and install the new differential pinion gear seal. Finally, install the differential assembly and fill the axle with lubricant.
By Bob
GM Specialist
01/11/2022Q: What is the drive pinion bearings installation procedure?
A:
Install the outer pinion bearing cup using the J 7817 and the J 8092. Make sure to determine the selective shim thickness for the pinion and install the inner pinion bearing using J 5590. Install a new collapsible spacer, lubricate the pinion bearings with axle lubricant and install the pinion into the axle housing. After that, install the outer pinion bearing onto the pinion and install a new pinion oil seal using the J 21128. Install the pinion yoke, the washer, and a new pinion nut.
By Bob
GM Specialist
01/11/2022Q: What is the drive pinion flange/yoke and/or oil installation procedure?
A:
Use the J 33782 to install the pinion seal. Next, apply a sealant to the splines of the pinion yoke and align the reference marks to install the pinion yoke. Install the washer and a new pinion nut. Next install the propeller shaft, and the rear brake rotors and inspect/add axle lubricant to the axle housing.
By Bob
GM Specialist
01/11/2022